Makita HM1214C dimensions Fastening torque, Torque, 30 40 N.m, 13 16 N.m

Page 17

P 17/ 20

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-7. Fastening torque

Fasten the Bolts and Screws to the fastening torque listed in Fig. 38.

Fig. 38

Position	Size of Hex Socket	Used	Fastening
No.	Head Bolt	Q’ty	Torque
19	M8 x 35	4	30 - 40 N.m
72	M6 x 25	3	13 - 16 N.m
	19	M6x30 Hex socket
		M6x30 Hex socket
		head bolt (6pcs.)
M6x30 Hex socket
head bolt (1 pc.)			Gear cover
Barrel cover			Gear cover
Barrel cover
	19		Handle
	Barrel complete
	Crank housing complete
Bearing box complete
	72		M6x30 Hex socket
			M6x30 Hex socket
			head bolt (4pcs.)
			Rear cover

M6x30 Hex socket head bolt (6pcs.)

<Note in Assembling>

Applying ThreeBond 1342 or Loctite 242 to their thread, tighten Hex socket head bolts illustrated above.

Image 17

Contents Standard equipment SpecificationOptional accessories Tool holder section RepairTool holder section Gear and Crank section Hammer sectionBarrel and AVT mechanism Cylinder section Approx g Makita grease N.No.1Chuck section DISASSEMBLY/ASSEMBLYAssembling Barrel sectionRepair DISASSEMBLY/ASSEMBLY 3-2. Barrel section Before Correction Ring Fluoride ring 28 the worn oneCorrection After Correction CorrectedTool holder section Disconnection of the Contact of Carbon brush with Commutator Bearing box section, Piston, Crank sectionBearing box section, Crank housing section Filter case cover Filter caseHousing DISASSEMBLY/ASSEMBLY Wrench Repair DISASSEMBLY/ASSEMBLY 3-5. Motor section Leaf Electrical parts in Handle sectionSpring Pay attention not to lose Leaf spring in this stepFastening Fastening torqueTorque 30 40 N.mMaintenance Program Controller Terminal Block Circuit diagramFig. D-2 Wiring diagram