Makita HRH01ZX2 specifications Repair 16/22

Repair P 16/22

[3] DISASSEMBLY/ASSEMBLY

[3]-7. Impact bolt in Tool holder complete for BHR262, HR262D)/ Tool holder guide complete for BHR262T, HR262TD (cont.)

ASSEMBLING

1)Assemble Impact bolt section to Tool holder (guide) complete as drawn in Fig. 42.

Fig. 42

Note: The five components are directional, and must be mounted as shown below.

Tool holder (guide) complete	Ring 10		O ring case with
Sleeve 9			O ring 9 fit inside
Impact bolt		Cushion ring 13
Bit (chuck)			Inner housing
installation			complete side
side
long	short

[cross-sectional view]

2)Push Ring spring 28 into the inner groove of Tool holder (guide) complete as drawn in Fig. 43.

Fig. 43

Note: 1) Use an extra Piston cylinder as a jig. Never use Piston cylinder that is to be assembled to the machine.

2)The end gap of Ring spring 28 must not be positioned in either of the two holes of Tool holder (guide) complete.

		Note: 1)
Piston cylinder			Piston cylinder as a jig
as a jig		Inner groove of
		Tool holder (guide)
end gap		complete
Ring spring 28
Tool holder	hole	Ring spring 28	O ring case
(guide) complete
hole

Note: 2)

[Correct] [Wrong]

Tool holder (guide) complete

Ring spring 28 end gap