MAINTENANCE
CAUTION:
Always be sure that the tool is switched off inspection or maintenance.
Replacing carbon brushes
When the resin insulatingtip inside the car- bon brush is exposed to contact the com- mutator, it will automatically shut off the motor. When this occurs, both carbon brushes should be replaced at the same time. Use only identicalcarbon brushes.
and unplugged before attempting to perform
7rInsulating tip
1 Carbon brush
Use a screwdriver to remove the brush holder cover.
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
KScrewdriver
Brush holder cover
Screwdriver
Brush holdei
12