indicator lamp
The green
the carbon brushes may be worn out, or | Service |
the electric circuit or the motor may be | indicator lamp |
| |
defective. If the indicator lamp does not |
|
light up and the tool does not start, the | T P o w e r - O N indlcator lamp (green) |
ON/OFF switch or the mains cord may be |
|
defective. |
|
The red service indicator lamp lights up |
|
when the carbon brushes are nearly worn |
|
out to indicate that the tool needs servicing. |
|
After approx. 8 hours of use, the motor will |
|
automatically be shut off. |
|
ASSEMBLY
Installing or removing bit
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing the bit.
Clean the bit shank and apply the bit grease providedto it before installingthe bit.
Insert the bit into the tool. Turn the bit and push it in until it engages.
9