Dust collector

Use the dust collector for safe, sanitary overhead operations. Install the bit, then attach the dust collector on the end by turning and applying pressure. Then secure it by turning the metal retainer clockwise.

CAUTION :

Empty the dust collector of i t s contents after drilling every 2 or 3 holes.

Drilling in wood or metal

Set the change lever for "rotation only." Use the optional drill chuck and chuck adapter for drilling up to 13 mm (1/2") in metal and up to 30 mm (1-3/16")in wood. To install the drill chuck and chuck adapter, refer to "installing or removingdrill bit".

Metal retainer

I	Drill holder

I	Drill chuck	1

CAUTION :

When the drill chuck is installed on this tool, do not use "rotation with hammering" action. The drill chuck and chuck adapter may be damaged.

Core bit (optional accessory)

Screw the core bit on the adapter. Install the core bit and adapter on the tool in the same manner as a drill bit.