FIG. a

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful t o the motor.

For all grounded tools with American type plug.

GROUNDING INSTRUCTIONS: This tool should be grounded while in use t o protect the operator from electric shock. The tool is equipped with a three- conductor cord and three-prong grounding-type plug to fit the proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire

t o a live terminal. Your unit is for use on 115 volts and has a plug that looks like Fig. "A'.

An adapter Fig. "B" and "C" is available for connecting Fig. "A' type plugs to two-prong receptacles. The green-colored rigid ear, lug, etc., extending from the adapter must be connected t o a permanent ground, such as a properly grounded outlet box.

FIG. B

FIG. C

Adapter

I	Grounding Blade Cover of Grounded Outlet Box