Makita HR2511 instruction manual Tion

Page 7

Side grip (auxiliary handle)

The side grip swings around to either side, allowing easy handling of the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired position and then tighten it by turning clockwise.

Selecting action mode

Rotation with hammering:

For drilling in concrete, granite, tile, etc.,

rotate the change lever to the

posi-

tion.

-

 

lever

Rotation only:

For drilling in wood or metal, rotate the change lever to the -3-position.

CAUTION :

To avoid rapid wear on the mode change mechanism, always positively located in one of the two action mode

be sure that the change lever is positions.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Rotary Hammer Safety INSTRUCTI0NS Minimum Gage for Cord Sets FIG. a Additional Safety Rules Page Tion Switch action Driving in anchor manually Dust collector Install the center bit MA1NTENANCE Lubrication Accessories Rotary Hammer Makita Corporation
Top Page Image Contents