Makita HR3000C Functional Description, Selecting the action mode, Switch action, Speed change

Page 5

14.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or

revolutions/blows per minute.

Number on adjusting

Revolutions per

Blows per minute

dial

minute

 

6

720

3,300

5

690

3,150

4

590

2,700

3

490

2,250

2

390

1,800

1

360

1,650

006379

Selecting the action mode

failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

•

Always be sure that the tool is switched off and

 

unplugged before adjusting or checking function on

1 2

3

4

003126

1.Change lever

2.Shift lever

3.Lock button

4.Rotation with hammering symbol

the tool.

Switch action

1. Switch trigger

When selecting an action mode, first set the change lever and the shift lever to the position shown in the figure. Then proceed as follows.

Rotation with hammering

1

003110

CAUTION:

1

2

003129

1.Pointer

2.Rotation with hammering symbol

•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns

to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to stop.

For drilling in concrete, masonry, etc., depress the lock button and rotate the change lever so that the pointer points to thesymbol. Use a tungsten-carbide tipped bit.

Rotation only

Speed change

1

1.Pointer

2.Rotation only symbol

1

003118

1. Adjusting dial

2

003132

For drilling in wood, metal or plastic materials, rotate the shift lever so that the pointer points to the symbol. Use a twist drill bit or wood bit.

The revolutions and blows per minute can be adjusted just by turning the adjusting dial. The dial is marked 1 (lowest speed) to 6 (full speed).

Refer to the table below for the relationship between the number settings on the adjusting dial and the

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Rotary Hammer Symbols SpecificationsConforms to the following European Directives 2006/42/EC EC Declaration of ConformityFor European countries only Rotary Hammer Safety Warnings Switch action Selecting the action modeFunctional Description Speed changeIndicator lamp AssemblySide grip Torque limiterBit angle when chipping, scaling or demolishing Installing or removing the bitDust cup optional accessory Depth gaugeOperation Blow-out bulb optional accessoryHammer drilling operation Chipping/Scaling/DemolitionReplacing carbon brushes Lubrication MaintenanceAccessories Page Makita Corporation
Related manuals
Manual 16 pages 22.87 Kb

HR3000C specifications

The Makita HR3000C is a powerful and versatile rotary hammer designed for heavy-duty applications in the construction and renovation sectors. Known for its robust performance, the HR3000C features a 3-mode operation: hammering only, hammering with rotation, and rotation only. This functionality makes it suitable for a wide range of tasks including drilling into concrete, masonry, and heavy materials, as well as for chiseling and demolition work.

One of the standout features of the HR3000C is its impressive motor, delivering 800 watts of power. This ensures high performance even in tougher applications, enabling users to tackle demanding projects without worrying about overheating or diminished performance. The hammering rate of the HR3000C is up to 4,600 BPM, allowing for fast penetration into hard surfaces, thus enhancing productivity on job sites.

The HR3000C is equipped with a user-friendly design that focuses on comfort and control. It comes with a rubberized grip handle that reduces vibrations, making it easier to handle during extended use. The side handle can be adjusted to provide additional leverage and stability, ensuring that users can maintain precision and control regardless of the angle or position of the tool.

In terms of durability, the HR3000C is built with high-quality materials that withstand rigorous use. Its housing is designed to resist impact and wear, while the internal components are engineered to tolerate tough drilling conditions. Additionally, Makita incorporates technologies that enhance the lifespan of the tool, such as a dust-proof design that protects the internal workings from debris and dust.

The tool accepts SDS-Plus shank bits, providing versatility when it comes to bit selection. This compatibility allows users to easily switch between various bit sizes and types, further enhancing the HR3000C's adaptability to different tasks.

Another notable aspect is the quick-release chuck mechanism, which allows for swift and easy bit changes without the need for additional tools. This feature not only saves valuable time but also minimizes downtime between tasks.

In summary, the Makita HR3000C rotary hammer is an essential tool for professionals seeking reliable performance, comfort, and durability. With its multiple modes of operation, robust power, and user-centric design, it is well-equipped to handle a variety of demanding applications in construction and renovation. Whether users are drilling, chiseling, or performing heavy-duty demolition work, the HR3000C remains a dependable choice in the Makita lineup.
Top Page Image Contents