ADPCM Card User Screens and Settings | ADPCM Card |
TYPE
The Type parameter identifies the voice and signaling requirements for the incoming circuit. The options are v (voice), voice and v&s (signaling) and trnsp (transparent). Use v when the input to the ADPCM channel is a 64 kbps channel and inband signaling is not required. Use v&s when the input to the ADPCM channel is a 64 kbps voice channel and the ADPCM card must also provide inband signaling.
The trnsp setting allows you to map the outputs of SRU ports to the ADPCM channel. The subrate data will be clocked into the ADPCM channel at an input rate of 24 kbps, then passed transparently
The
If the engine is assigned to a voice card, this selection will show v&s. If assigned to an SRU card, it will show trnsp. You cannot change it from this screen.
RATE
The Rate parameter identifies the compression requirements for the incoming circuit. The options are 24K, 32K, and 40K. The sum of the pair of engines must always equal 64 kbps.
If this engine is assigned to a user card port, the selection will show the value that was chosen on that port. It cannot be changed from this screen.
SIG MODE
The Signaling Mode parameter identifies the type of signaling required for the incoming circuit from the network. If v&s was chosen in the Type setting, the options are e&m, fxs, plar, and fxo. If v or trnsp was chosen in the Type setting, the only option is n/a.
If this engine is assigned to a user card, this selection will show user. It cannot be changed from this screen.
CODING
The Coding parameter identifies the PCM companding format required for the incoming circuit from the network. The choices are
If this engine is assigned to a voice or BRI card, this selection will show the value you selected for that port. If this engine is assigned to an SRU card, this selection will show
Server Cards |
