Introduction |
Figure 5-2 shows an application where a user needs less than 23 B channels (say 6 B channels for video), and some dedicated DS0s (say 12 for LAN-WAN interconnect). In this case, the D channel, B channels, and the DS0s all run on the same facility from the equipment to the carrier. Inside the carrier’s facility access point, the D and B channels are extracted from the facility and sent to the ISDN switch, and the 12 DS0s are extracted from the facility and sent to the carrier's dedicated DACS network. In this example, 5 timeslots are unused.
Carrier
DACSCarrier
ISDN Switch
Carrier
DACS
12
6B+D
T1 With: 1 D Channel
6 B Channels
12
5 Unused Timeslots
IAD
Figure 5-2. DS0s and B Channels on the Same Facility
Server Cards |