Zhone Technologies 900, 800 ACS-MCC Card User Screens and Settings, Main Screen Actions, Ipaddr

ACS-MCC Card User Screens and Settings MCC Card

	Table 3-1. Main Screen Actions
Action	Function
Save	Saves changes to settings.
Undo	Returns all settings to the last saved state.
Refresh	Redraws the screen.
Copy	Copies the contents of the current column to the next column. Useful if
	you change a lot of entries in one column and want to repeat those changes
	in subsequent columns.
<	The “less than” symbol scrolls backward through the 128 ports associated
	with this card.
>	The “greater than” symbol scrolls forward through the 128 ports associated
	with this card.
porT (C1-C3)	The port option allows you to “jump” to a specific port. Enter the number
	of the port you wish to see, press the <Enter> key, and the requested port
	will be displayed. To return to the Main Screen, press “e” and then press
	<Enter>.
Nstat	Displays the Network Data Screen.
Main	Returns to the System Main Screen. If changes are made to settings and
	not saved, you will be prompted to save or lose changes.

Table 3-2. Main Screen Option Settings and Defaults

Parameter				User Options	Default
STATE	stdby		actv		stdby
IPADDR	ip				0.0.0.0
NETMASK	ip				0.0.0.0
DEF RT	none	stat		dyn	none
RIP	off	rx	tx	rx/tx	off
SH	off	on			off
WEIGHT	01-15				01
FMT-MAIN	bxr	hdlc			bxr
FMT-SUB	bxr	hdlc			bxr
IF-TYPE	unnum		num		unnum

STATE

The State setting determines whether the port is active or inactive. Set the State to stdby (standby) to disable the Ethernet port, or choose actv (active) to enable the port.

IPADDR

When configured for unnumbered interfaces, the IP Address setting identifies the global IP Address of the MCC. This address is thus valid regardless of the state of the Ethernet port. When configured for numbered interfaces, the IP address of the Ethernet port identifies the IP address of the Ethernet interface only.

3-4 Server Cards