Inverse Multiplexer (IMUX) Card Settings | IMUX Card |
BONDING MODE
The Bonding Mode parameter shows the bonding mode used for this call. The values for this setting are 00 (mode0) and 01 (mode1). The bonding mode is selected from the HSU card IMUX screen.
LAST DISC.
The Last Disconnect parameter shows the cause codes for the last disconnect on that port. The values are 01 (no resources available), 02 (channel error), 03 (normal clearing), 04 (bandwidth addition request), 05 (mode not supported), 06 (rate not supported), 07 (information channel or frame alignment word framing lost), 08 (delay equalization unsuccessful), 09 (unknown command or protocol error), 10 (temporary failure, in recovery), 11 (failure, no recovery) and 12 (bandwidth deletion request). The value 00 is used for unassigned engines.
Table 7-2. The IMUX Card Configure Screen of Actions
Action | Function |
|
|
Refresh | Since IMUX call information is not updated in real time, this command will |
| refresh the screen with new information. |
|
|
Config | Brings up the Configure screen. See below. |
Main | Returns to the main screen. |
Server Cards |