Zhone Technologies 800, 900, 600 manual Assignment of Services, Add Trunk Route Screen

ACS-PRI/BRI Card Configuring ISDN Features

Another example of this procedure is shown in Figure 6-18.If you want a single incoming trunk group to be routed to only one outgoing trunk group, D channel #1, trunk group “A” is routed to D channel #2, trunk group “B.” The alternate routes 2-3 must contain the same information in alternate route #2. Since this is the only alternative route, if that route is busy, the unit will drop the call.

dchan:1 trunk:A dchan:2 trunk:B dchan:3 trunk:C dchan:4 trunk:D dchan:1 trunk:A dchan:2 trunk:B dchan:2 trunk:B dchan:1 trunk:B

Add uPdate dElete pgUp pgDn Main

Figure 6-18. Add Trunk Route Screen

6.4.8Assignment of Services

Some carriers support call-by-call service selection in their ACS-PRI/BRI offerings. This feature allows users to select a different service (and, usually, a different billing rate) for each call placed.

If call-by-call service is supported, users must tell the system which service(s) is/are supported by each D channel, and what the code is for each service. The carrier will supply a service code for each supported service. The Service format code is always two digits, a space and the name of the service. When placing a call using call profiles, only valid service codes will be allowed (see Call Profiles below for additional information about services).

If call-by-call service selection is not supported by the carrier or not required for the user’s applications, then there is no need to assign service to a D channel.

Server Cards 6-31