Zhone Technologies 900, 800, 600 manual Port and Numbered Port Configuration 1.1 Version Only

MCC Card ACS-MCC Card User Screens and Settings

3.3.1.1C-Port and Numbered Port Configuration (1.1 Version Only)

After establishing the card’s Ethernet parameter settings, configure the card’s ports. From the ACS-MCC Card Main Screen, press “t” (porT command) to go to its ports. The ACS-MCC card has three high-speed ports (C1, C2, and C3) and 128 other ports (1 to 128), in addition to the Ethernet port.

Table 3-3shows a typical C-Port Screen. After pressing “t” above, choose the C-ports (C1, C2, and C3) and 128 other ports (1 to 128) to view this screen.

Figure 3-3. Typical C-Port Screen

The “less than” (<) and “greater than” (>) keys allow you to scroll through the other numbered ports associated with this card. Figure 3-4shows a Typical Numbered Port Screen. Table 3-2lists the options and defaults for the card ports.

Table 3-3lists the actions you can perform from either screen. To perform an action, press the key indicated by the capitol letter on the bottom highlighted line of the screen.

Table 3-4lists the Port Assignment Screen parameters and available setting. These are also described in the following paragraphs.

Server Cards 3-7