ATM Card |
STATE
The State setting determines whether the port is active or inactive. Select stdby (standby) for ports you are not using or have not yet configured. Or, select actv (active) for ports ready to be used for ATM traffic.
VPC SUPPORT
The Virtual Path Connection Support setting indicates whether or not VPCs are supported. In this revision, VPCs are not supported, so the only option available is no.
MAX VPCS
This setting defines the maximum simultaneous,
VPI
The Virtual Path Identifier is the ATM connection identification number provided by the carrier for each service application. The options are 0 (zero) to 15.
MAX VCCS
The Maximum Virtual Channel Connections indicates the number of simultaneous VC connections that can exist on the UNI port. The options are 63 to 1023.
VCI WIDTH
The Virtual Channel Width setting indicates the number of bits in the VCI field of the cell header that is interpreted. The options are 6 to 10.
LOC IP ADDR
The Local IP Address is used to identify the global IP address of the ATM card. Any valid IP address may be used. (For information regarding IP network design, contact your system administrator.) The default is 0.0.0.0.
Server Cards |
