Zhone Technologies 800 Imux Card Inverse Multiplexer Imux Card Settings, Direction, Main Channel

IMUX Card Inverse Multiplexer (IMUX) Card Settings

Table 7-1. IMUX Card Main Screen Options and Defaults

Parameter			User Options
STATE	idle	busy
DIRECTION	out	in
WAN	w1-1	w1-2	w2-1 w2-2 w3-1 w3-2 w4-1 w4-2
MAIN CHANNEL	01-23	01-30	99
N-CHANNELS	01-23	01-30	00
BONDING MODE	00-01
LAST DISC.	01-12	00

STATE

The State parameter shows the activity on this IMUX engine (port). The values are idle or busy.

DIRECTION

The Direction parameter shows the direction of a busy circuit. The values are out (a call originated from this location to another) or in (a call originated from another location).

WAN

The WAN parameter shows the WAN link used by the busy circuit. The values for this setting are w1-1through w4-2.

MAIN CHANNEL

The Main Channel parameter shows the timeslot on the WAN link shown on the previous setting that is used for the call to the IMUX primary number or hunt number for this call. Values for this setting are 1-24for T1 systems or 1-31for E1 systems. The value 99 is used for unassigned engines.

N-CHANNELS

The N-Channels parameter shows the number of additional timeslots needed to complete the IMUX call. The values for this setting are 1-23for T1 systems and 1-30for E1 systems. The value 00 is used for unassigned engines.

Server Cards 7-3