Zhone Technologies 800, 900, 600 manual ATM Server Option Tree

ACS-ATM Card User Screens and Settings ATM Card

LEGACY

This setting indicates the physical port(s) on the legacy side of the ATM module associated with this ATM user port. The options are muser (for user cards) and wan (for individual WAN links). If wan is chosen, another pop-up window will appear to allow the user to select which WAN link to associate with this port. Valid selections are w1-1to w4-2.

If the Legacy port is a single port, it must be configured on the user card screen. The user card number will appear as U# (where # is the card slot number).

PORT

Identifies the port on the user card to expect legacy traffic. If a single user port was configured on the associated user card screen, the user port number will appear. If wan or muser is selected in the Legacy setting above, this option will show n/a.

TS

The Time slot setting identifies the time slots used by this port. If wan is chosen in the Legacy setting above, this field will show table and time slots can be selected by using the table. If muser is chosen in the Legacy setting above, TS can be set to the desired number of time slots by using the arrow keys.

FORMAT

The Format setting determines the structure of the AAL1 frames. Refer to Figure 4-10for the proper Format settings to choose.

CBR/AAL1

WAN

muser

Unstrc

cas-T1

basic

cas-E1

Figure 4-10. ATM Server Option Tree

4-26 Server Cards