Stanley Black & Decker MB656 user manual Safety Symbols, Local Safety Regulations

Page 4

SAFETY SYMBOLS

Safety symbols and signal words, as shown below, are used to emphasize all operator, maintenance and repair ac- tions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equipment.

DANGER

WARNING

CAUTION

CAUTION

NOTICE

IMPORTANT

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

This safety alert and signal word indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury.

This safety alert and signal word indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.

This safety alert and signal word indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.

This signal word indicates a potentially hazardous situation which, if not avoid- ed, may result in property damage.

This signal word indicates a situation which, if not avoided, will result in damage to the equipment.

This signal word indicates a situation which, if not avoided, may result in dam- age to the equipment.

Always observe safety symbols. They are included for your safety and for the protection of the tool.

LOCAL SAFETY REGULATIONS

Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.

4 ► MB656 User Manual

Image 4

Contents MB656 Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Be Thoroughly Trained Before Operating the Unit Alone Obey Safety RulesKnow the Work Conditions Parking Brake 66219 Guaranteed Sound Power Level Sticker Tool Stickers & TagsPRE-OPERATION Procedures PRE-INSTALLATION InstructionsOperation Operating a Breaker Long Term StoragePreparation for USE Positioning the CarrierPositioning the Breaker Tool on the Work Material BackhoesMaintain Down Pressure BreakingBlank Firing Underwater Usage Grease the BITTroubleshooting Problem Cause SolutionDaily Maintenance Checks MaintenanceTool Stop and Lower Bushing Charging the Accumulator NormalFlow Control KIT Instructions Hose RoutingsWear Tolerances Lower Bushing ItemTool Stop Item Retainer PIN ItemTool Failure not Covered Under Warranty WORN-OUT Front Bushings or Retainer PinsProper USE & Care of Tool Bits Blank Firing or Free RunningPrying CorrosionTool Failure Covered Under Warranty Internal Material FlawChisel MoilBlunt Flow Test Procedures Test ProcedureTroubleshooting Heat Load TestDefinitions ToolSpecifications Dimensions and WeightsAccessories MiscellaneousMB656 Power Cell Illustration Housing Parts Illustration MB656 Parts List Charge Valve Assy InclMB656 Mounting Brackets Page Stanley Hydraulic Tools SE Naef Road Milwaukie, Oregon