3-5. Selecting A Location
Movement
2
Tipping
YDo not move or operate unit where it could tip.
OR
1
Location
3
1 Lifting Forks
Use lifting forks to move unit.
5
18 in
(460 mm)
18in
(460 mm)
4
Extend forks beyond opposite side of unit.
2Lifting Handles Use handles to lift unit.
3Hand Cart
Use cart or similar device to move unit.
4 Rating Label
Use rating label to determine input power needs.
5 Line Disconnect Device
Locate unit near correct input power supply.
Y Special installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.
loc_2 3/96 -