Miller Electric OM-229 038D manual Drive Roll And Wire Guide Kits 2 Roll Models, Fraction

Table 7-1. Drive Roll And Wire Guide Kits (2 Roll Models)

NOTE

Base selection of drive rolls upon the following recommended usages:

1.V-Grooved rolls for hard wire.

2.U-Grooved rolls for soft and soft shelled cored wires.

3.U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).

4.V-Knurled rolls for hard shelled cored wires.

5.Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).

	Wire Diameter			Drive Roll		Wire Guide
Metric	Fraction	Decimal	Part No.		Type	Inlet
0,6/0,8 mm	0,023/0,030 in	0,023/0,030 in	156053100		V	156090018
0,8/1 mm	0,030/0,035 in	0,030/0,035 in	156053101		V	156090018
1/1,2 mm	0,035/0,045 in	0,035/0,045 in	156053102		V	156090018
1/1,2 mm	0,035/0,045 in	0,035/0,045 in	156053104		U	156090018
1/1,2 mm	0,035/0,045 in	0,035/0,045 in	156053106		V-K	156090018

OM-229 038 Page 28