Installation / Operation / Maintenance

Installation / Operation / Maintenance

5.Power Supply: This pump is designed for 115 V., 60 Hz., operation and requires a minimum 15 amp individual branch circuit. Both the pump and switch are supplied with 3-wire cord sets with grounding-type plugs. The switch plug is inserted directly into the outlet and the pump plug inserts into the opposite end of switch plug.

Hazardous voltage. Can shock, burn or cause death. Pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of elec- tric shock, be certain that it is connected only to a properly grounded, grounding type receptacle such as a grounded water pipe or a properly grounded metallic raceway or ground wire system. Ground terminal on pump cord plug is provided for your protection. DO NOT REMOVE!

A ground fault circuit interrupter is recommended for use with any electrical appliance submerged in water. For instal- lation of such a circuit, consult a licensed electrician.

6.After the piping and the check valve (if needed) have been installed, the unit is ready for operation

7.Check the operation by filling the sump with water and observing pump operation through one complete cycle.

Risk of flooding. Can cause personal injury and/or property damage. Failure to make this operational check may lead to flooding and premature failure.

OPERATION

Risk of electric shock. Shock can burn or kill. Do not handle a pump or pump motor with wet hands or when standing on wet or damp surface, or in water.

1.Keep the pump inlet screen clear.

2.The shaft seal depends on water for lubrication. Do not operate the pump unless it is submerged in water as the seal may be damaged if the pump is allowed to run dry.

3.The motor is equipped with an automatic reset thermal pro- tector. If the temperature in the motor should rise unduly, the switch will cut off all of the power before any damage can be done to the motor. When the motor has cooled suf- ficiently, the switch will reset automatically and restart the motor. If the protector trips repeatedly, the pump should be removed and checked for the cause of the difficulty. Low voltage, long extension cords, a clogged impeller, very low head or lift, etc., could cause cycling. Refer to the Troubleshooting Chart on Page 5 for additional information.

4.Periodically inspect the pump, system components and sump for debris and foreign objects. Keep the sump free of all refuse. Perform routine maintenance as required.

Risk of flooding. Flooding can cause personal injury or property damage. This pump comes with the auto- matic float switch mounted on the motor cover ready for oper- ation. Do not change switch settings. Refer to the “Motor, Switch & Cord Specifications” chart for switch settings.

MAINTENANCE

To Clean the Pump Screen:

NOTICE: Attempting to disassemble motor will void warranty.

Risk of electrical shock. Shock can burn or kill. Always unplug the pump from the power source before servic- ing any system component. Do not lift pump by power cord.

1. Disconnect power before servicing.

Risk of Electric shock. Shock can burn or cause death. When servicing the system always disconnect power cord from the electrical outlet.

2.Loosen the discharge pipe.

3.Use the pump handle to lift the pump out of the sump pit and place the pump on a clean level surface.

4.To clean the screen, remove the three screws holding the screen to the pump base (See Figure 1), remove and rinse off the screen.

Anti-

Airlock

Valve

Screen

Screen screws (3)

Figure 1 – To clean the screen and anti-airlock valve and to attach float switch.

5.Re-install the screen and the screws.

6.Put the pump back into the sump pit.

7.Re-install the discharge pipe.

8.Check the system operation by filling the basin with water and observing the pump’s operation through one complete cycle.

Flood hazard. May cause personal injury or prop- erty damage. Failure to make this operational check can lead to improper operation, premature pump failure and flooding.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2905, 2955 specifications

Simer Pumps is renowned for its innovative design and reliable performance, particularly evident in its models 2905 and 2955. These pumps are tailored for diverse applications ranging from residential to commercial, highlighting the brand's commitment to versatility and efficiency.

The Simer 2905 is a robust submersible pump designed for clear water applications. It boasts a powerful motor that ensures high flow rates, making it ideal for draining pools, floodwater removal, or managing groundwater levels. This model is equipped with a durable thermoplastic construction that not only enhances its longevity but also makes it lightweight and easy to handle. One of its standout features is the automatic on/off switch, which activates the pump when water levels rise, ensuring hassle-free operation.

On the other hand, the Simer 2955 is designed for more demanding applications, capable of handling not only clear water but also wastewater. This submersible pump features a heavy-duty cast iron construction which provides excellent durability. It includes an advanced vortex impeller design, which allows it to handle solids and debris effectively, making it suitable for sewage and effluent applications. The 2955 also incorporates a float switch for automatic operation and can pump water down to a very low level, maximizing efficiency.

Both models showcase technological inclusions that enhance performance and energy efficiency. They are engineered with thermal overload protection to prevent overheating, ensuring the longevity of the motors. The pumps also feature easy maintenance options, with removable components that facilitate routine checks and part replacements when necessary.

The Simer Pumps 2905 and 2955 are characterized by their user-friendly designs. They come equipped with standard 1-1/2 inch discharge ports, making them compatible with most hoses and fittings. Furthermore, their compact designs allow for easy installation in various settings, whether it be basements, galleries, or while constructing new sites.

In summary, Simer Pumps 2905 and 2955 stand out in the market for their reliable performance, versatile applications, and durable construction. With features designed for both efficiency and user convenience, these pumps are ideal choices for anyone seeking dependable solutions to water management and disposal challenges. The combination of quality materials, innovative technology, and ease of use make them a valuable asset for both home and commercial environments.