4-2. Setting Digital Meter Board PC4 DIP Switches
1
2
3Meter DIP switches are factory set to display wirefeed speed and voltage using 14 pin feedback. Meter hold feature is factory set to off position.
Wire Feed Speed Display
Inches Per Minute | Meters Per Minute | ||
| S1 |
| S1 |
S2 | S2 | S2 | S2 |
14 Pin | Voltage/Current | 14 Pin | Voltage/Current |
Voltage | Sense Kit | Voltage | Sense Kit |
Feedback | (195194) | Feedback | (195194) |
1Front Meter Panel
2S1 DIP Switch
3S2 DIP Switch
If the DIP switches are set to a Meter Hold (ON) position, the meter value will hold 5 seconds after gun is trig- gered. The meter value will continue to hold for 8 seconds after trigger is released or until gun is
.When using power sources without 14 pin voltage/current feedback − optional remote voltage/current kit 195194 is required.
Indicates this DIP switch setting has no effect on this function.
| Meter Hold |
(ON) | (OFF) |
S1 | S1 |
Amps Display
S2
S2
14Pin
Current Feedback
Voltage/Current Sense Kit (195194)
803 141/ Ref. 803 124