Miller Electric 255 warranty Wire Drive And Gears Drive Roll And Wire Guide Kits

See Table 6-1

Drive Roll & Wire Guide Kits.

.Hardware is common and not available unless listed.

148 529-H

Figure 6-3. Wire Drive And Gears

Table 6-1. Drive Roll And Wire Guide Kits

IMPORTANT: Base selection of drive rolls upon the following recommended usages:

1.V-Grooved rolls for hard wire.

2.U- Grooved rolls for soft and soft shelled cored wires.

3.U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).

4.V-Knurled rolls for hard shelled cored wires.

5.Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).

	Wire Diameter			Kit No.	Drive Roll		Inlet
Fraction		Decimal	Metric		Part No.	Type	Wire Guide
.023/.025 in.		.023/.025 in.	0.6 mm	087 131	087 130	V-Grooved	056 192
.030 in.		.030 in.	0.8 mm	079 594	053 695	V-Grooved	056 192
.035 in.		.035 in.	0.9 mm	079 595	053 700	V-Grooved	056 192
.045 in.		.045 in.	1.2 mm	079 596	053 697	V-Grooved	056 193

Ref. S-0026-B/7-91

OM-157 066 Page 27