Table of Contents | Simer Pumps 2360, 2385, 2325 specs

Table of Contents	3
Thank you for purchasing a top quality, factory tested pump.
	Page
General Safety	2
Warranty	3
General Information	4
Installation	5
Operation	5
Maintenance	6
Troubleshooting	6

Simer Limited Warranty

	SIMER warrants to the original consumer purchaser (“Purchaser”) of its products	Requests for service under this warranty shall be made by returning the defec-
	that they are free from defects in material or workmanship.	tive product to the Retail outlet or to SIMER as soon as possible after the dis-
	If within twelve (12) months from the date of the original consumer purchase	covery of any alleged defect. SIMER will subsequently take corrective action as
	any such product shall prove to be defective, it shall be repaired or replaced at	promptly as reasonably possible. No requests for service under this warranty
	SIMER’s option, subject to the terms and conditions set forth below. Your origi-	will be accepted if received more than 30 days after the term of the warranty.
	nal receipt of purchase is required to determine warranty eligibility.	This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive rem-
	Exceptions to the Twelve (12) Month Warranty	edy for defective products.
	Five (5) Year Warranty:	SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR
	If within five (5) years from original consumer purchase any Pre-Charge water	CONTINGENT DAMAGES WHATSOEVER.
	system tank shall prove to be defective, it shall be repaired or replaced at	THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL
	SIMER’s option, subject to the terms and conditions set forth below.	OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT
	General Terms and Conditions	NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
	Purchaser must pay all labor and shipping charges necessary to replace product	FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE
		DURATION OF THE APPLICABLE EXPRESS WARRANTIES PROVIDED HEREIN.
	covered by this warranty. This warranty shall not apply to acts of God, nor shall
		Some states do not allow the exclusion or limitation of incidental or conse-
	it apply to products which, in the sole judgement of SIMER, have been subject
	to negligence, abuse, accident, misapplication, tampering, alteration; nor due	quential damages or limitations on how long an implied warranty lasts, so the
	to improper installation, operation, maintenance or storage; nor to other than	above limitations or exclusions may not apply to you. This warranty gives you
	normal application, use or service, including but not limited to, operational fail-	specific legal rights and you may also have other rights which vary from state
	ures caused by corrosion, rust or other foreign materials in the system, or oper-	to state.
	ation at pressures in excess of recommended maximums.

SIMER • 293 Wright St. • Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351

2325, 2360, 2385 specifications

Simer Pumps has established itself as a reliable provider of high-quality pump solutions that cater to various industries. Among their impressive lineup, the Simer Pumps 2385, 2360, and 2325 models stand out due to their advanced technologies and robust characteristics, making them suitable for numerous applications.

The Simer Pumps 2385 is designed for high-efficiency performance and durability. This model is particularly known for its ability to handle a wide range of fluids, including corrosive liquids. Its construction features high-grade materials, providing excellent resistance to wear and tear. The 2385 is equipped with a powerful motor that allows it to deliver a high flow rate while maintaining energy efficiency. Additionally, it incorporates a user-friendly interface, making it easy for operators to monitor and control operations.

The Simer 2360 model is recognized for its versatility and reliability. It comes with an innovative impeller design that enhances performance by maximizing fluid movement while minimizing energy consumption. This model often features a self-priming design, allowing it to operate effectively even in applications where the pump is not fully submerged. Its compact size makes it perfect for installations in tight spaces, and the improved sealing technology ensures minimal maintenance is required over its operational lifetime.

The Simer Pumps 2325 is tailored for applications requiring a consistent and steady flow. This model is characterized by its low noise operation and high thermal resistance, making it ideal for environments where sound and heat must be minimized. The 2325 utilizes advanced motor technology, which enhances its overall efficiency and reduces energy costs. Typically, it features a modular design that simplifies repairs and part replacements, ensuring minimal downtime for users.

All three Simer Pumps models are designed with a focus on user convenience and long-term performance. They incorporate technological advancements that prioritize energy efficiency, making them environmentally friendly options in industrial settings. The combination of durability, efficiency, and ease of maintenance makes the Simer Pumps 2385, 2360, and 2325 models a wise investment for businesses looking to enhance their fluid transfer systems. Whether for industrial, commercial, or residential use, these pumps exemplify Simer’s commitment to quality and innovation in pumping technology.