Installation / Operation

INSTALLATION

1.Install the pump on a hard level surface. Make sure that the pump cannot pick up rocks, mud and debris, etc. If neccesary, put a block under the pump to raise it slightly. See Figure 1.

Roofs

Basements

3696 0500 NEW

Figure 1: Typical Installations.

2.Protect the power cord from damage. Uncovered cords should be routinely inspected for damage or deterioration. DO NOT operate the pump if the cord is damaged.

3.Choose an adapter and install it as indicated in Figure 2.

OPERATION

Hazardous voltage. Can shock, burn or cause death. Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface, or in water.

1. The shaft seal depends on water for lubrication. Do

not operate the pump unless it is in water as the seal

may be damaged if allowed to run dry.

2. The motor is equipped with an automatic reset ther-

mal protector. If the temperature in the motor should

rise unduly, the switch will cut off all power before

damage can be done to the motor. When the motor

has cooled sufficiently, the switch will reset automati-

cally and restart the motor. If the protector trips

repeatedly, remove the pump and check it as to the

cause of difficulty. Low voltage, long extension cords,

clogged impeller, very low head or lift, etc., could

cause cycling.

3. The pump will not remove all water. If the pump is

operating and suddenly no water comes out of the

discharge hose, shut off the unit immediately. The

water level is probably very low and the unit has bro-

ken prime.

NOTICE: For continuous operation, water must flow

through pump to prevent motor overheating. The

pump is cooled by the water flow through the housing.

4. This pump is designed to pump cold water only.

Pumping heated liquids can overheat the motor and

cause the thermal overload to trip.

5. Pump can run when water doesn’t completely cover

the motor housing, but the inlet must be completely

submerged or it will break suction, will not move any

water, and may damage the shaft seal.

1-1/4" FBSP X 1" FNPT

1" MNPT X 3/4" Male Garden Hose Adapter

1-1/4" FBSP X 1-1/4" & 1"

Hose Barb Adapter*

Use this	OR
Barbed Adapter*	OR
as a 1" Adapter

Cut it off Here As a

1-1/4" Adapter

6. Keep the pump inlet clean at all times. If the ground

or surface where the pump sits is dirty, raise the

pump slightly to reduce the amount of debris pulled

into the pump inlet.

*Barbed Adapter Available with Model Number 2385 only.

Figure 2: Adapter Connections.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2325, 2360, 2385 specifications

Simer Pumps has established itself as a reliable provider of high-quality pump solutions that cater to various industries. Among their impressive lineup, the Simer Pumps 2385, 2360, and 2325 models stand out due to their advanced technologies and robust characteristics, making them suitable for numerous applications.

The Simer Pumps 2385 is designed for high-efficiency performance and durability. This model is particularly known for its ability to handle a wide range of fluids, including corrosive liquids. Its construction features high-grade materials, providing excellent resistance to wear and tear. The 2385 is equipped with a powerful motor that allows it to deliver a high flow rate while maintaining energy efficiency. Additionally, it incorporates a user-friendly interface, making it easy for operators to monitor and control operations.

The Simer 2360 model is recognized for its versatility and reliability. It comes with an innovative impeller design that enhances performance by maximizing fluid movement while minimizing energy consumption. This model often features a self-priming design, allowing it to operate effectively even in applications where the pump is not fully submerged. Its compact size makes it perfect for installations in tight spaces, and the improved sealing technology ensures minimal maintenance is required over its operational lifetime.

The Simer Pumps 2325 is tailored for applications requiring a consistent and steady flow. This model is characterized by its low noise operation and high thermal resistance, making it ideal for environments where sound and heat must be minimized. The 2325 utilizes advanced motor technology, which enhances its overall efficiency and reduces energy costs. Typically, it features a modular design that simplifies repairs and part replacements, ensuring minimal downtime for users.

All three Simer Pumps models are designed with a focus on user convenience and long-term performance. They incorporate technological advancements that prioritize energy efficiency, making them environmentally friendly options in industrial settings. The combination of durability, efficiency, and ease of maintenance makes the Simer Pumps 2385, 2360, and 2325 models a wise investment for businesses looking to enhance their fluid transfer systems. Whether for industrial, commercial, or residential use, these pumps exemplify Simer’s commitment to quality and innovation in pumping technology.