Zenith 216666666 operating instructions Operating Procedures, Spare Parts

Page 6

Operating Procedures

LOW

ANTI-

FREEZE

OFF

ECONOMY

HIGH

Water Temperature

Zenith Tudor water heaters are fully automatic, and may be left switched ON under the control of the variable thermostat.

Nominal operating temperature can be varied from about 30°C to about 80°C.

Temperature should not be set to less than 60°C without due regard to regulations governing the storage temperature of hot water.

Economy Setting

The economy setting "E" will maintain stored water temperature at approximately 60°C. At the "E" setting, the temperature control locates into a set position and a slight resistance will be felt when rotating the temperature control beyond that setting. This measure is to help ensure that higher temperatures are only selected deliberately.

Frost Protection

If the heater is located where ambient air temperature could fall below 5°C when the heater is not in use, the "anti freeze" setting on the temperature control will maintain stored water temperature over 5°C to prevent freezing and damage to the water heater.

The same protection does not extend to connecting pipework or fittings.

Safety Cutout

Should the heater over-heat, a manually resettable safety cutout will automatically turn the heating element OFF. The cutout must be reset by a Zenith Service Provider or a licensed electrician. Users should never reset the cutout without qualified assistance.

Cleaning

Never use strong, corrosive or abrasive cleaning materials. Wipe clean the outer surfaces with a sponge or soft cloth using a mild soap and water. Domestic dish washing liquid detergent is most suitable.

Spare Parts

PART NO DESCRIPTION

Z90401 element neck ring kit Tudor

Z90407 fascia kit Tudor undersink

Z90408 fascia kit Tudor oversink

Z90415 element kit Tudor 5ltr o/sink

Z90416 element kit Tudor 10ltr o/sink

Z90417 element kit Tudor 5ltr u/sink

Z90418 element kit Tudor 10ltr u/sink

Z90420 pilot light kit Tudor

Z90421 thermostat kit Tudor

Z90423 overload kit Tudor

PagePage6 6

ZenithZenithdorTudor- Installation- Installation& Operating& OperatingInstructionsInstructions- 81333- 81333- May- July20 - 2004

Image 6
Contents Installation & Operating Instructions Zenith TudoräStep Two Step Five Quick Installation GuideStep One Flow Restrictor Step ThreeBefore installing, ensure that the following are available Step One TapwareStep Two Positioning Installation ProcedureStep Four Connecting Step Three FasteningProblem Solving Fault Possible cause SolutionOver-Sink Under-Sink Operating Procedures Spare PartsRemoving the case Service ProceduresTap Temperature Adjustment Replacing the caseWarranty Information

216666666 specifications

Zenith 216666666 is a remarkable timepiece that represents the pinnacle of Swiss watchmaking craftsmanship and innovation. Known for its exquisite design and advanced technology, this watch stands out in the luxury segment, appealing to collectors and enthusiasts alike.

One of the main features of the Zenith 216666666 is its exceptional movement. Powered by the renowned El Primero chronograph caliber, this watch boasts an impressive frequency of 36,000 vibrations per hour, allowing for precise timekeeping and enhanced accuracy. The El Primero movement has garnered a reputation for its reliability and performance, making it a hallmark of Zenith's engineering prowess.

The design of the Zenith 216666666 is equally striking. The case is meticulously crafted from high-grade stainless steel, providing durability while maintaining a sophisticated appearance. It features a polished finish that enhances its aesthetic appeal. The watch face is adorned with a stunning array of sub-dials, providing functionality while adding to the visual complexity of the timepiece. The sapphire crystal is anti-reflective, ensuring excellent legibility under varying lighting conditions.

One of the standout characteristics of the Zenith 216666666 is its commitment to precision. The chronograph function allows for timing events with remarkable accuracy, and the tachymetric scale on the bezel enhances its utility for speed measurements. This makes the watch not only an elegant accessory but also a functional tool for professionals and enthusiasts in various fields.

The watch also incorporates modern technology, such as a transparent case back that reveals the intricate mechanics of the El Primero movement. This feature allows wearers to appreciate the artistry of the watch's inner workings, showcasing the intricate details and craftsmanship that go into each piece.

In terms of water resistance, the Zenith 216666666 is designed to withstand daily wear and tear, making it suitable for both casual and formal occasions. The meticulous attention to detail in the watch’s construction ensures that it remains a lasting investment.

Overall, Zenith 216666666 embodies the fusion of traditional watchmaking artistry and cutting-edge technology. With its robust movement, elegant design, and practical features, it is a testament to Zenith's commitment to excellence in horology, making it a prized possession for any watch lover.