Zenith 216666666 Service Procedures, Tap Temperature Adjustment, Removing the case

Page 7

#

 

Service Procedures

 

 

 

This appliance may only be serviced by a suitably qualified technician.

 

 

Disconnect from power and turn water supply OFF before attempting any kind

 

 

of service work.

 

 

Removing the case

 

 

1. Remove temperature control knob by gripping it and pulling towards you.

 

 

2. Remove the single retaining screw located beneath the temperature control knob.

 

 

3. Remove the four case screws two at top, two at bottom.

 

 

4. The case can now be lifted off carefully.

 

 

Replacing the case

 

Knob removed to show screw

Reverse of the above procedure.

 

Replacing a thermostat

 

 

 

 

1. Remove the front cover.

 

 

2. Disconnect the two electrical terminals from the thermostat. These are

 

 

spade connectors and can be easily pulled off.

 

 

3. Remove the two screws attaching the thermostat to the plastic upright.

 

 

4. Pull the capillary out of the thermostat pocket located on the element

 

 

assembly.

 

 

5. Take the new thermostat (Z90421) and uncoil about half of the capillary tube.

 

 

6. Push the new capillary into the pocket ensuring that:

 

 

a) if it is an over sink model, the cutout bulb goes in first then the

 

 

thermostat bulb behind it.

 

 

b) if it is a under sink model, then the reverse is applicable.

 

Thermostat spade connectors

Attach the thermostat to the plastic upright.

 

 

 

 

Reconnect the two electrical terminals. It does not matter which way around

 

 

the connections occur.

 

 

Ensure the remaining capillary coil is out of the way of any live terminals.

 

 

Ensure the plastic upright is located securely in the position provided.

 

 

Refit the cover assembly.

#

Top Ring “X”

Mixer Cartridge “Y”

Tap Temperature Adjustment

Adjustment of a tap temperature limiter on Solo and Hero vented taps should be made only by a Zenith Service Provider or a qualified

technician.

1.Remove tap handle assembly to expose the mixer cartridge.

2.Lift and rotate the serrated top ring "X" from the mixer cartridge "Y".

Rotating the ring left or right will regulate the water temperature. Rotating the ring clockwise will increase the water temperature. Rotating the ring anticlockwise will decrease water temperature. The tap normally operates with the ring in the central position.

3.Reassemble the tap handle assembly to its original condition.

4.Test the temperature of the water outlet to check acceptability.

 

 

 

 

 

ZenithZenithudorTudor- Install- Installationtion & &OperatingOperatingInstructionsInstructions- 81333- 81333- May- July2003- 2004

Page 7

Page 7

 

 

 

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Zenith Tudorä Installation & Operating InstructionsFlow Restrictor Step Three Quick Installation GuideStep One Step Two Step FiveStep One Tapware Before installing, ensure that the following are availableStep Three Fastening Installation ProcedureStep Four Connecting Step Two PositioningFault Possible cause Solution Problem SolvingOver-Sink Under-Sink Spare Parts Operating ProceduresReplacing the case Service ProceduresTap Temperature Adjustment Removing the caseWarranty Information

216666666 specifications

Zenith 216666666 is a remarkable timepiece that represents the pinnacle of Swiss watchmaking craftsmanship and innovation. Known for its exquisite design and advanced technology, this watch stands out in the luxury segment, appealing to collectors and enthusiasts alike.

One of the main features of the Zenith 216666666 is its exceptional movement. Powered by the renowned El Primero chronograph caliber, this watch boasts an impressive frequency of 36,000 vibrations per hour, allowing for precise timekeeping and enhanced accuracy. The El Primero movement has garnered a reputation for its reliability and performance, making it a hallmark of Zenith's engineering prowess.

The design of the Zenith 216666666 is equally striking. The case is meticulously crafted from high-grade stainless steel, providing durability while maintaining a sophisticated appearance. It features a polished finish that enhances its aesthetic appeal. The watch face is adorned with a stunning array of sub-dials, providing functionality while adding to the visual complexity of the timepiece. The sapphire crystal is anti-reflective, ensuring excellent legibility under varying lighting conditions.

One of the standout characteristics of the Zenith 216666666 is its commitment to precision. The chronograph function allows for timing events with remarkable accuracy, and the tachymetric scale on the bezel enhances its utility for speed measurements. This makes the watch not only an elegant accessory but also a functional tool for professionals and enthusiasts in various fields.

The watch also incorporates modern technology, such as a transparent case back that reveals the intricate mechanics of the El Primero movement. This feature allows wearers to appreciate the artistry of the watch's inner workings, showcasing the intricate details and craftsmanship that go into each piece.

In terms of water resistance, the Zenith 216666666 is designed to withstand daily wear and tear, making it suitable for both casual and formal occasions. The meticulous attention to detail in the watch’s construction ensures that it remains a lasting investment.

Overall, Zenith 216666666 embodies the fusion of traditional watchmaking artistry and cutting-edge technology. With its robust movement, elegant design, and practical features, it is a testament to Zenith's commitment to excellence in horology, making it a prized possession for any watch lover.
Top Page Image Contents