Simer Pumps 2955-01, 3075SS, A5500, 2957-01, 2330 owner manual Read and Follow Safety Instructions

Page 2

Safety

2

READ AND FOLLOW

SAFETY INSTRUCTIONS!

Carefully read and follow all safety instructions in this manual and on pump.

This is the safety alert symbol. When you see this symbol

on your pump or in this manual, look for one of the fol- lowing signal words and be alert to the potential for personal injury.

warns about hazards that will cause serious per- sonal injury, death or major property damage if ignored.

warns about hazards that can cause serious per- sonal injury, death or major property damage if ignored.

warns about hazards that will or can cause minor personal injury or property damage if ignored.

The word NOTICE indicates special instructions which are important but not related to hazards.

Electrically powered sump pumps normally give many years of trouble-free service when correctly installed, maintained, and used. However, unusual circumstances (interruption of power to the pump, dirt/debris in the sump, flooding that exceeds the pump’s capacity, electrical or mechanical failure in the pump, etc.) may prevent your pump from functioning normally. To pre- vent possible water damage due to flooding, consult your dealer about installing a secondary sump pump, a DC backup sump pump, and/or a high water alarm. See the “Troubleshooting Chart” in this manual for information about common sump pump problems and remedies. For more information, see your dealer or call customer service at 1-800-468-7867.

1.Know the pump application, limitations, and potential hazards.

2.Disconnect the power before servicing.

3.Release all pressure within the system before servicing any component.

4.Drain all the water from the system before servicing.

5.Secure the discharge line before starting the pump. An unse- cured discharge line will whip, possibly causing personal injury and/or property damage.

6.Check hoses for weak or worn condition before each use, making certain that all connections are secure.

7.Periodically inspect the sump, pump and system compo- nents. Keep free of debris and foreign objects. Perform rou- tine maintenance as required.

8.Provide a means of pressure relief for pumps whose dis- charge line can be shut-off or obstructed.

9.Personal Safety:

a.Wear safety glasses at all times when working with pumps.

b.Keep work area clean, uncluttered and properly lighted – replace all unused tools and equipment.

c.Keep visitors at a safe distance from work area.

d.Make workshop child-proof – with padlocks, master switches, and by removing starter keys.

10.When wiring an electrically driven pump, follow all electri- cal and safety codes that apply.

11.This equipment is only for use on 115 volt and is equipped with an approved 3-conductor cord and 3-prong, grounding- type plug.

Hazardous voltage. Can shock, burn or cause death. To reduce the risk of electric shock, pull the plug before servicing. Pump is supplied with a grounding conductor and grounding-type attachment plug. Be sure it is connected only to a properly grounded grounding-type receptacle.

Where a 2-prong wall receptacle is encountered, it must be replaced with a properly grounded 3-prong receptacle installed in accordance with codes and ordinances that apply.

This pump has not been investigated for use in swimming pool areas.

12.A ground fault circuit interrupter is recommended for use with any electrical appliance submerged in water. Installation and all wiring should be performed by a qualified electrician.

13.Make certain the power source conforms to the requirements of your equipment.

Simer Limited Warranty

SIMER warrants to the original consumer purchaser (“Purchaser”) of its products that they are free

General Terms and Conditions

from defects in material or workmanship.

Purchaser must pay all labor and shipping charges necessary to replace product covered by this

If within twelve (12) months from the date of the original consumer purchase any such product

warranty. This warranty shall not apply to acts of God, nor shall it apply to products which, in the

shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms

sole judgement of SIMER, have been subject to negligence, abuse, accident, misapplication, tam-

and conditions set forth below. Your original receipt of purchase is required to determine warran-

pering, alteration; nor due to improper installation, operation, maintenance or storage; nor to other

ty eligibility.

than normal application, use or service, including but not limited to, operational failures caused

Exceptions to the Twelve (12) Month Warranty

by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of

Ninety (90) Day Warranty:

recommended maximums.

Requests for service under this warranty shall be made by returning the defective product to the

If within ninety (90) days from original consumer purchase any Drill Pump or MiniVac Pump shall

Retail outlet or to SIMER as soon as possible after the discovery of any alleged defect. SIMER will

prove to be defective, it shall be replaced, subject to the terms set forth below.

subsequently take corrective action as promptly as reasonably possible. No requests for service

Two (2) Year Warranty:

under this warranty will be accepted if received more than 30 days after the term of the warranty.

This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defective

If within two (2) years from original consumer purchase, any 1/3 HP Submersible Sump Pump, or

products.

Models 2330, 2300 or A5500, shall prove to be defective, it shall be repaired or replaced at

SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT

SIMER’s option, subject to the terms and conditions set forth below.

DAMAGES WHATSOEVER.

Three (3) Year Warranty:

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WAR-

If within three (3) years from original consumer purchase any 4” Submersible Well Pump, 1/2 HP

RANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WAR-

Submersible Sump Pump, or Booster Pump Model 3075SS shall prove to be defective, it shall be

RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT

repaired or replaced at SIMER’s option, subject to the terms and conditions set forth below.

EXTEND BEYOND THE DURATION OF THE APPLICABLE EXPRESS WARRANTIES PROVIDED

Five (5) Year Warranty:

HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or lim-

If within five (5) years from original consumer purchase any Pre-Charge water system tank shall

itations on how long an implied warranty lasts, so the above limitations or exclusions may not

prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms and

apply to you. This warranty gives you specific legal rights and you may also have other rights

conditions set forth below.

which vary from state to state.

 

SIMER • 293 Wright Street • Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351

EMail: info@simerpumps.com • Web: http://www.simerpumps.com

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

Image 2
Contents Pompes de puisard submersible Installation/Fonctionnement/PiècesSubmersible Sump Pumps Safety Read and Follow Safety InstructionsGeneral Information / Installation Operation Installation / Electrical / OperationMaintenance Airlocks Operation / Maintenance / TroubleshootingTroubleshooting Key Part Description Repair PartsRepair Parts List 2957-01 2957-03Sécurite Lire Toutes CES Instructionset LES SuivreDébits Renseignements généraux / InstallationCaractéristiques Entretien Installation / Electricité / FonctionnementFonctionnement Pour nettoyer la crépine de la pompeBouchons D’AIR Fonctionnement / Entrentien / Recherche des pannesRecherche des pannes Pour remplacer un interrupteur à flotteur verticalRéf Désignation Qté 2957-01 2957-03 Pièces de rechangeListe DE Pièces DE Rechange Seguridad LEA Y Observe LAS Instrucciones DE SeguridadInformación General / Instalación Mantenimiento Instalación / Electridad / OperaciónOperación Para limpiar la criba de la bombaBolsas DE Aire Operación / Mantenimiento / Localización de fallasLocalización de fallas Cómo reemplazar el interruptor de flotador verticalDescripción de La pieza Piezas de repuestoLista DE Piezas DE Repuesto
Related manuals
Manual 24 pages 60.1 Kb

2330, 2957-01, 2957, A5500, 2955-01 specifications

Simer Pumps has established itself as a trusted name in the water pump industry, providing high-quality products that cater to various applications. Among their lineup, the Simer Pumps 3075SS, 2955-01, A5500, 2957, and 2957-01 models stand out for their performance, durability, and innovative technologies.

The Simer 3075SS is a stainless steel submersible pump designed for heavy-duty applications. Its robust construction offers exceptional corrosion resistance, making it ideal for residential and commercial use in demanding environments. This pump features an efficient motor that can handle both clear and slightly contaminated water, boasting a maximum flow rate of up to 75 gallons per minute. The automatic float switch ensures hands-free operation, activating the pump when water reaches a predetermined level.

The Simer 2955-01 is another reliable option, perfect for draining basements, flooded areas, or swimming pools. This submersible utility pump is lightweight and easy to transport, yet it doesn't compromise on efficiency. With a maximum flow rate of 30 gallons per minute, the 2955-01 is equipped with a powerful motor that enables continuous operation. The built-in overload protection safeguards the pump from potential damage, extending its lifespan.

Next in the lineup is the Simer A5500, a versatile high-capacity utility pump designed for more demanding applications. With its durable construction, this pump can handle larger volumes of water, making it suitable for commercial and industrial settings. The A5500 boasts a maximum pumping capacity of 70 gallons per minute, and its rugged design enables it to operate effectively in both fresh and saltwater environments. This model also comes with a thermal overload switch that provides additional protection against overheating.

The Simer 2957 and 2957-01 models are designed with user convenience in mind. These submersible pumps guide water away from flooded areas efficiently. They provide a maximum flow rate of 30 gallons per minute and feature an adjustable float switch for customizable operation. The lightweight design makes them easy to transport, while the thermoplastic construction ensures longevity and resistance to corrosion.

In conclusion, Simer Pumps' models 3075SS, 2955-01, A5500, 2957, and 2957-01 exemplify the company’s commitment to quality and reliability. With their robust construction, intuitive features, and advanced technologies, these pumps meet the diverse needs of consumers and professionals alike, ensuring efficient water management across various applications.