Simer Pumps 5020B, 5023SS owner manual Warranty, Retain Original Receipt for Your Records

Page 6

Warranty

6

RETAIN ORIGINAL RECEIPT FOR YOUR RECORDS.

LIMITED WARRANTY

SIMER warrants to the original consumer purchaser (“Purchaser” or “You”) of its products that they are free from defects in material and workmanship for a period of twelve (12) months from the date of the original consumer purchase.

If, within twelve (12) months from the original consumer purchase, any such product shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms and conditions set forth below. The original purchase receipt and product warranty information label are required to determine warranty eligibility. Eligibility is based on purchase date of original product – not the date of replacement under warranty. The warranty is limited to repair or replacement of product only – Purchaser pays all removal, installation, labor, shipping, and incidental charges.

For parts or troubleshooting assistance, DO NOT return product to your retail store. Contact SIMER Customer Service at 1-800-468-7867 / 1-800-546-7867.

Claims made under this warranty shall be made by returning the product (except sewage pumps, see below) to the retail outlet where it was purchased immediately after the discovery of any alleged defect. SIMER will subsequently take corrective action as promptly as reasonably possible. No requests for service will be accepted if received more than 30 days after the warranty expires.

SEWAGE PUMPS

DO NOT return a sewage pump (that has been installed) to your retail store. Contact SIMER Customer Service. Sewage pumps that have seen service and been removed carry a contamination hazard with them.

If your sewage pump has failed:

Wear rubber gloves when handling the pump;

For warranty purposes, return the pump’s cord tag and original receipt of purchase to the retail store;

Dispose of the pump according to local disposal ordinances.

Exceptions to the Twelve (12) Month Limited Warranty

 

 

Product

Warranty Period

 

BW85P, CM10, CMK, M40, M40P

90 days

 

 

 

 

 

 

2300, 2310, 2330, 2520ULST, 2943, 2955, 2956, 2957, 2960, 5023SS, A5500

2 Years

 

 

4” Submersible Well Pumps, 2945, 2958, 2975PC, 2985, 3075SS, 3983, 3984

3 Years

 

 

 

 

 

 

Pre-Charge Water System Tank, 3985, 3986

5 Years

 

 

 

3963, 3988, 3995, 3997

Lifetime

 

 

 

 

General Terms and Conditions

You must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty does not apply to the following: (1) acts of God; (2) products which, in SIMER’s sole judgement, have been subject to negligence, abuse, accident, misapplication, tampering, or alteration; (3) failures due to improper installation, operation, maintenance or storage; (4) atypical or unapproved application, use or service; (5) failures caused by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of recommended maximums.

This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defective products.

SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

SIMER • 293 Wright St., Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351

Web Site: http://www.simerpumps.com

Image 6
Contents Llame al Mod B, 5023SSCall PagesGeneral Safety SafetySpecifications DescriptionInstallation InstallationRisk of electric shock. Pump is designed for 115V., 60 HZ Troubleshooting OperationOperation Model Repair PartsSwitch FP0018-7D Key PartWarranty Retain Original Receipt for Your RecordsSécurité Caractéristiques TechniquesRendement La terre Risques d’électrocutionFiche de terre pour usage sur une prise de courant Risques de débordementFonctionnement Diagnostic des pannesFonctionnement Débrancher la pompe avant de travailler sur la pompeRéf Désignation des pièces Pièces de rechangeModèle Interrupteur FP0018-7DGarantie Pompes D’EAUX D’ÉGOUTEspecificaciones SeguridadDescripción RendimientoInstalación InstalaciónPeligro de inundación Solución de problemas FuncionamientoFuncionamiento Descripción RefaccionesModelo Interruptor FP0018-7DGarantia Bombas Cloacales

5023SS, 5020B specifications

Simer Pumps is renowned for its commitment to innovative pump technology, and the Simer Pumps 5020B and 5023SS models exemplify this dedication. These pumps are designed to meet a variety of water movement needs, making them ideal for residential, agricultural, and light industrial applications.

The Simer 5020B is a durable thermoplastic pump well-regarded for its versatility. It features a robust motor that operates effectively with a flow rate of up to 1200 gallons per hour. This pump is engineered for continuous operation, making it perfect for draining flooded areas, removing water from basements, or even managing irrigation systems. The 5020B is also equipped with an automatic float switch that activates the pump when water levels rise, ensuring effective water management without the need for manual intervention.

On the other hand, the Simer 5023SS offers superior performance with a stainless-steel construction, adding to its durability and resistance to corrosion. It comes with a powerful motor capable of moving up to 3000 gallons of water per hour, making it suitable for more demanding applications, such as large-scale irrigation or dewatering construction sites. The 5023SS is equipped with a thermal overload protection system, which prevents overheating and prolongs the lifespan of the pump.

Both models are designed with user-friendliness in mind. They provide easy installation options and require minimal maintenance, making them ideal choices for both homeowners and professionals. The ergonomic design ensures that these pumps can be easily transported and placed wherever needed.

In terms of energy efficiency, both the 5020B and 5023SS have been engineered to minimize power consumption while maximizing performance. This makes them not only cost-effective choices but also environmentally friendly.

Overall, the Simer Pumps 5020B and 5023SS stand out for their reliable performance, innovative technology, and ease of use. These pumps are suitable for a variety of applications and are designed to deliver dependable water management solutions for many years. Whether you are looking for a pump for routine home use or for heavier industrial tasks, Simer Pumps delivers robust options that meet diverse needs effectively.