Installation / Operation

INSTALLATION

1.Install the pump on a hard level surface. Make sure that the pump cannot pick up rocks, mud and debris, etc. If neccesary, put a block under the pump to raise it slightly. See Figure 1.

GFCI		Use foliage to cover
GFCI		tubing to waterfall
Outlet

Power cord

Plastic tubing

to waterfall

Landscaping rocks

Raise the pump off of the bottom of the pond

3388 0399 NOC 6030

Figure 1: Typical garden pond and waterfall installation.

2.Protect the power cord from damage. Uncovered cords should be routinely inspected for damage or deterioration. DO NOT operate the pump if the cord is damaged.

3.Choose an adapter and install it as indicated in Figure 2.

1-1/4" FNPT X 3/4"

Garden Hose Fitting

1-1/4" X 1-1/4" Hose Barb Elbow

Figure 2: Adapter connections.

OPERATION

Hazardous voltage. Can shock, burn or cause death. Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface, or in water.

1.The shaft seal depends on water for lubrication. Do not operate the pump unless it is in water as the seal may be damaged if allowed to run dry.

2.The motor is equipped with an automatic reset ther- mal protector. If the temperature in the motor should rise unduly, the switch will cut off all power before damage can be done to the motor. When the motor has cooled sufficiently, the switch will reset automati- cally and restart the motor. If the protector trips repeatedly, remove the pump and check it as to the cause of difficulty. Low voltage, long extension cords, clogged impeller, very low head or lift, etc., could cause cycling.

3.The pump will not remove all water. If the pump is operating and suddenly no water comes out of the discharge hose, shut off the unit immediately. The water level is probably very low and the unit has bro- ken prime.

NOTICE: For continuous operation, water must flow through pump to prevent motor overheating. The pump is cooled by the water flow through the housing.

4.This pump is designed to pump cold water only. Pumping heated liquids can overheat the motor and cause the thermal overload to trip.

5.Pump can run when water doesn’t completely cover the motor housing, but the inlet must be completely submerged or it will break suction, will not move any water, and may damage the shaft seal.

NOTICE: For continuous operation the water depth must be at least 5” (13 cm) to prevent the pump from overheating.

6.Keep the pump inlet clean at all times. If the ground bottom or surface where the pump sits is dirty, raise the pump slightly to reduce the amount of debris pulled into the pump inlet.

7.If you need to reduce the flow, restrict the discharge. Do not restrict the intake. Doing so will starve the pump for water and can cause overheating.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2430 specifications

Simer Pumps 2430 is a robust and versatile solution designed for various water management applications. Known for its reliability and efficiency, the Simer Pumps 2430 has become a popular choice among homeowners and professionals alike.

One of the standout features of the Simer Pumps 2430 is its powerful motor. Equipped with a high-efficiency motor, it delivers optimal performance while ensuring low energy consumption. This feature not only minimizes electricity bills but also contributes to its eco-friendly design. The motor is designed to operate quietly, making it suitable for residential areas where noise levels can be a concern.

The 2430 model is built to handle a wide range of tasks, including sump pumping, water transfer, and dewatering applications. It boasts a high pumping capacity, allowing it to move large volumes of water quickly and efficiently. This is particularly beneficial in situations where rapid water removal is essential, such as during heavy rainfall or in flood-prone areas.

In terms of construction, the Simer Pumps 2430 is crafted from durable materials that enhance its longevity and resilience against wear and tear. The pump features a corrosion-resistant casing that is designed to withstand harsh environmental conditions, making it ideal for both indoor and outdoor use. Its design also incorporates an easy-access motor for straightforward maintenance and repairs.

Another notable characteristic of the Simer Pumps 2430 is its user-friendly design. The pump comes with a convenient float switch that automatically activates the pump when the water level rises above a certain point. This feature eliminates the need for manual operation, allowing for continuous and hassle-free water management. Additionally, the pump's lightweight design makes it easy to transport and install in various locations.

Safety is a primary consideration in the design of the Simer Pumps 2430. It is equipped with thermal overload protection to prevent damage from overheating, ensuring consistent performance over time. This feature provides peace of mind to users, knowing that the pump can operate safely under different conditions.

In summary, the Simer Pumps 2430 combines powerful performance, durability, and user-friendly features into a compact and efficient pumping solution. Whether for residential or light commercial applications, it addresses a range of water management needs with reliability and ease. Its innovative technologies and thoughtful design make it a standout choice in the market, appealing to those seeking a dependable pump for various water-related tasks.