Hitachi DH 24PD instruction manual Using the dust-collecting adaptor and dust bag

Page 13

CAUTION:

When the drill bit touches an iron reinforcing rod, the bit will stop immediately and the rotary hammer will react to revolve. Therefore please grip the side handle and handle tightly as shown in Fig. 7.

3.Using the dust-collecting adaptor and dust bag.

Using this unit with the dust-collecting adaptor and dust bag attached creates

a more hygienic working environment free of flying dust. Attach as shown in Fig.1. The unit can be used as an ordi- nary rotary hammer when the dust-col- lecting adaptor and dust bag is not at- tached.

(1)Attaching the dust-collecting adaptor and the dust bag.

a)Attaching the dust-collecting adap- tor.

Loosen the knob on the side handle and insert the attachment rod on the dust-collecting adaptor in the mounting hole.

The adaptor can be inserted from either direction A or B (see Fig.8). Insert and push in the hose in the hose attachment hole of the main unit until it reaches the inner sur- face (depth 5/8" (15 mm)) and con- firm that it is firmly fixed. (see Fig.9)

b)Attaching the dust bag.

Insert the dust bag firmly in the dust bag attachment hole on the main unit and fasten securely (see Fig.10).

CAUTION:

The dust-collecting adaptor and dust bag is made for use when drilling con- crete. Do not use for drilling holes in metal or wood.

Attachment

Mounting Hole

Rod

Hose

Dust

B

Collecting

Adaptor

A

 

Knob on Side Handle

Fig.8

Hose

Attachment

Hole

Hose

Body Hose

Fig.9

Dust Bag

Attachment

Hole

Dust Bag

Fig. 10

13

Image 13
Contents Safety Instructions For Rotary Hammer Model DH 24PD Contents Important Information Meanings of Signal WordsGeneral Safety Rules SafetyPage Keep all screws, bolts and covers tightly in place Do not wipe plastic parts with solvent Specific Safety Rules and SymbolsDouble Insulation for Safer Operation Functional Description SpecificationsName of Parts Applications Assembly and OperationPrior to Operation Mounting the drill bit Fig Switch operation HOW to USESelecting the driver bit Confirm the direction of bit ro Tation FigUsing the dust-collecting adaptor and dust bag Stopper Stroke Wing Bolt Dust Bag Rail Rotation only When not using the dust-collecting adaptorWhen driving wood screws Fig When driving machine screws FigMount the taper shank adaptor to Maintenance and Inspection Standard Accessories AccessoriesKnock-in anchor Rotation + Striking Outer wedge type with Female screw Drilling holes rotation only Hitachi Page Page Page Page 706