External dia. | Code No. | |
7/16" | 944460 | |
(11 mm) | ||
| ||
31/64" | 944461 | |
(12.3 mm) | ||
| ||
1/2" | 993038 | |
(12.7 mm) | ||
| ||
9/16" | 944462 | |
(14.3 mm) | ||
| ||
73/128" | 944500 | |
(14.5 mm) | ||
| ||
11/16" | 944463 | |
(17.5 mm) | ||
| ||
27/32" | 944464 | |
(21.5 mm) | ||
|
Taper mode | Code No. | Applicable drill bit | ||
|
|
| 7/16" (11 mm) | |
|
| Drill bit | 31/64" (12.3 mm) | |
Morse taper | 303617 | 1/2" (12.7 mm) | ||
(Taper | ||||
9/16" (14.3 mm) | ||||
(No. 1) |
| shank) | ||
|
| 73/128" (14.5 mm) | ||
|
|
| ||
|
|
| 11/16" (17.5 mm) | |
Morse taper | 303618 | Drill bit | 27/32" (21.5 mm) | |
(Taper | ||||
(No. 2) | ||||
| shank) |
| ||
|
|
| ||
303619 | Taper shank adaptor formed A- | |||
taper or | ||||
|
| |||
303620 | optional accessory, but drill bit for | |||
it is not provided. | ||||
|
| |||
|
|
|
| |
◯1/2" (13 mm) Hammer Drill chuck and Chuck wrench
For drilling operations when using a straight shank bit for impact driling with a hammer drill
Impact Drill | |
| |
Application | |
|
|
Straight shank Bit | |
|
|
1/2" (13 mm) Hammer Drill Chuck
Chuck wrench
Name | Code No. |
1/2" (13 mm) Hammer Drill Chuck | 303332 |
Chuck wrench | 303334 |
Rubber Cap | 303335 |
2. Knock-in anchor (Rotation + Striking)
Anchor Setter (for anchor setting)
20