ACCESSORIES
WARNING: Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES |
|
|
(1)Case (Molded plastic) (Code No. 302211) | 1 | |
(2)Side Handle (Code No. 303659) | ............................................................................... | 1 |
1 | ||
(4)Dust Bag (Code No. 302048) | 1 | |
[Number (3) and (4) refer to use on concrete] |
| |
(5)Cap (Code No. 302374) | 1 | |
OPTIONAL ACCESSORIES | sold separately |
|
(1) Drill Bit (Slender | (2) Adaptor for slender shaft |
Shaft) |
1. Drilling anchor holes (Rotation + Striking)
◯Drill Bit (Slender shaft)
| (1) Drill Bit (Slender Shaft) |
| (2) Adaptor for | ||
|
| Slender Shaft | |||
|
|
|
| ||
Outer diameter | Effective Length | Overall Length | Code No. | Code No. | |
1/8" | 306369 |
| |||
(3.4mm) | (45mm) | (90mm) |
| ||
| 306370 | ||||
9/64" | 306368 | ||||
| |||||
(3.5mm) | (45mm) | (90mm) |
| ||
|
| ||||
|
|
|
|
| |
◯Drill Bit (Taper shank) and taper shank adaptor
| (2) Taper Shank Adaptor |
(1) Drill Bit (Taper Shank) | |
| Cotter (Code No. 944477) |
19