Hitachi DH 24PD instruction manual Mount the taper shank adaptor to

Page 17

8.How to use the drill bit (taper shank) and the taper shank adaptor.

(1) Mount the taper shank adaptor to the

rotary hammer. (Fig. 18)

Drill Bit

Grip

Taper shank

(2) Mount the drill bit (taper shank) to the

taper shank adaptor. (Fig. 18)

Adaptor

Front Cap

(3)	Turn the switch ON, and drill a hole in
	prescribed depth.
(4)	To remove the drill bit (taper shank),
	insert the cotter into the slot of the taper
	shank adaptor and strike the head of
	the cotter with a hammer supporting
	on the rests. (Fig. 19)

Fig. 18

Cotter Taper Snank Adaptor

Rests

Fig. 19

17

Image 17

Contents

Safety Instructions For Rotary Hammer Model DH 24PD Contents Important Information Meanings of Signal WordsGeneral Safety Rules SafetyPage Keep all screws, bolts and covers tightly in place Do not wipe plastic parts with solvent Specific Safety Rules and SymbolsDouble Insulation for Safer Operation Name of Parts SpecificationsFunctional Description Prior to Operation Assembly and OperationApplications Mounting the drill bit Fig Switch operation HOW to USESelecting the driver bit Confirm the direction of bit ro Tation FigUsing the dust-collecting adaptor and dust bag Stopper Stroke Wing Bolt Dust Bag Rail Rotation only When not using the dust-collecting adaptorWhen driving wood screws Fig When driving machine screws FigMount the taper shank adaptor to Maintenance and Inspection Standard Accessories AccessoriesKnock-in anchor Rotation + Striking Outer wedge type with Female screw Drilling holes rotation only Hitachi Page Page Page Page 706