Hitachi DH 24PC HOW to USE, Selecting the driver bit, Confirm the direction of bit rotation Fig

Page 12

Push button

Fig. 6

Fig. 7

English

bits which have 6-17/32" (166 mm), 6-19/64" (160 mm) and 4-21/64" (110 mm) overall length.

◯Dump particles after every two or three holes when drilling.

◯Please replace the drill bit after removing dust collector (B).

8.Selecting the driver bit

Screw heads or bits will be damaged should an inappropriate bit for the screw diameter be employed to drive in the screws.

9.Confirm the direction of bit rotation (Fig. 5)

The bit rotates clockwise (viewed from

the rear side) by pushing the R-side of R

the reversing switch lever. The L-side of the lever is pushed to turn the bit

counterclockwise.L

R

Lever

L

L

Fig. 5

HOW TO USE

CAUTION:

◯To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill pits and other various parts are installed or removed. The power switch should also be turned off during a work break and after work.

Change Lever

1. Switch operation

The rotation speed of the drill bit can be controlled steplessly by varying the amount that the trigger switch is pulled. Speed is low when the trigger switch is pulled slightly and increases as the switch is pulled more. To turn the switch OFF, release the trigger switch to its original position.

2. Rotation + Striking

This rotary hammer can be set to rota- tion and striking mode by pressing the push button and turning the change le-

ver to mark. (Fig. 6)

(1) Mount the drill bit.

(2) Pull the trigger switch after applying the drill bit tip to the drilling position (Fig. 7)

(3)Pushing the rotary hammer forcibly is not necessary at all. Pushing slightly so that drill dust comes out gradually is just sufficient.

12

Image 12

Contents DH 24PC Manual DE Instrucciones E Instrucciones DE SeguridadContents Meanings of Signal Words Important InformationSafety General Safety RulesEnglish Keep all screws, bolts and covers tightly in place Specific Safety Rules and Symbols Do not wipe plastic parts with solventDouble Insulation for Safer Operation Specifications Functional DescriptionName of Parts Assembly and Operation ApplicationsPrior to Operation Installation of dust cup or dust col Lector B Optional accessoriesMounting the drill bit Fig HOW to USE Switch operationSelecting the driver bit Confirm the direction of bit rotation FigWhen driving machine screws Fig Rotation onlyWhen driving wood screws Fig Striking onlyUsing depth gauge Fig HOW to USE the Core BIT for Light Load How to bore FigMounting Dismounting. Fig Maintenance and Inspection Page Page Page Page Page Page Informations Importantes Signification DES Mots D’AVERTISSEMENTSecurite Regles Generale DE SecuriteConserver CES Instructions Français Utiliser l’outil correct Regles DE Securite Specifiques ET Symboles Ne pas essuyer les parties en plastique avec du solvantDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Precaution Montage du foret de perçage FigUtilisation Sélection de la mèche pour visseuseVérifiez la direction de rotation de La mèche Fig Fonctionnement de l’interrupteurRotation + frappe Rotation seulementLors du vissage des vis machine Fig Enfoncement de vis à bois FigPercussion uniquement Utilisation de la quenouille FigComment Utiliser LA Couronne Pour UNE Charge Legere MontagePerçage Fig Démontage FigEntretien ET Inspection Page Page Page Page Page Page Información Importante Significado DE LAS Palabras DE SeñalizaciónSeguridad Normas Generales DE SeguridadGuarde Estas Instrucciones Eléctrica puede resultar en una lesión seria Utilice la herramienta correcta Normas Y Símbolos Específicos DE Seguridad Maneje con cuidado las herramientas eléctricas¡GUARDE Este Manual DE Instrucciones Donde Aislamiento Doble Para Ofrecer UNA Operación MÁS SeguraDescripción Funcional NomenclaturaEspecificaciones Montaje Y Operación AplicacionesAntes DE LA Operación Montaje de la broca Fig PrecauciónComo SE USA Selección de la broca destornilladorConfirmar la dirección de rotación De la broca Fig Operación del conmutadorRotación + golpeteo Rotación solamenteCuando coloque tornillos para metal Fig Atornillando tornillos para madera FigPercusión solamente Modo de usar el tope FigModo DE Usar LA Barrena Tubularpara Cargas Ligeras MontajeModo de taladrar Fig Desmontaje FigMantenimiento E Inspección Accesorios Accesorios EstándarAncla de martillar Percusión solamente Tipo de reborde exterior con tornillo hembra Excavar, ranuado y rebordes Percusión solamente Perforación rotación solamente Hitachi Page Page Page Hitachi Koki Canada Co