Hitachi DH 24PC instruction manual Rotation only, When driving machine screws Fig

Page 13

Fig. 9

Push button

Fig. 8 Front Cap

English

CAUTION:

◯When the drill bit touches an iron reinforcing rod, the bit will stop immediately and the rotary hammer will react to revolve. Therefore please grip the side

handle and handle tightly as shown in Fig. 7.

Change Lever

3.Rotation only

This rotary hammer can be set to rota- tion only mode by pressing the push

button and turning the change lever to

mark. (Fig. 8)

To drill a wood or metal material using the separately sold drill chuck and chuck adaptor, proceed as follows. Installing drill chuck and chuck adaptor (Fig. 9):

(1)Mount the drill chuck to the chuck adaptor.

(2)The part of the SDS-plus shank is the same as the drill bit. Therefore, refer to the item of “Mounting the drill bit” for attaching it.

Grip

Drill Chuck	Part of SDS-plus shank

Chuck Adaptor

CAUTION:

◯Application of force more than necessary will not only reducing drilling effi- ciency at all, but will deteriorate the tip edge of the drill bit and reduce the service life of the rotary hammer in addition.

◯Drill bit may snap off while disengaging the rotary hammer from the jammed hole. For disengaging, it is important to use a pushing motion or turn the drill bit counterclockwise.

◯Do not attempt to drill anchor holes or holes in concrete with the main unit in the rotation only function.

◯Do not attempt to use the rotary hammer in the rotation and striking function with the drill chuck and chuck adaptor attached. This would seriously shorten the service life of every components of the machine. Bit

4.When driving machine screws (Fig. 10)

First, insert the bit into the socket in the end of chuck adaptor (D).

Next, mount chuck adaptor (D) on the main unit using procedures described in 5 (1), (2), (3), put the tip of the bit in the slots in the head of the screw, grasp the main unit and tighten the screw.

Socket

Chuck Adaptor (D)

Front Cap

Grip

Fig. 10

13

Image 13

Contents Manual DE Instrucciones E Instrucciones DE Seguridad DH 24PCContents Important Information Meanings of Signal WordsGeneral Safety Rules SafetyEnglish Keep all screws, bolts and covers tightly in place Do not wipe plastic parts with solvent Specific Safety Rules and SymbolsDouble Insulation for Safer Operation Functional Description SpecificationsName of Parts Applications Assembly and OperationPrior to Operation Lector B Optional accessories Installation of dust cup or dust colMounting the drill bit Fig Switch operation HOW to USESelecting the driver bit Confirm the direction of bit rotation FigRotation only When driving machine screws FigStriking only When driving wood screws FigUsing depth gauge Fig How to bore Fig HOW to USE the Core BIT for Light LoadMounting Dismounting. Fig Maintenance and Inspection Page Page Page Page Page Page Signification DES Mots D’AVERTISSEMENT Informations ImportantesRegles Generale DE Securite SecuriteConserver CES Instructions Français Utiliser l’outil correct Ne pas essuyer les parties en plastique avec du solvant Regles DE Securite Specifiques ET SymbolesDouble Isolation Pour UN Fonctionnement Plus SUR NOM DES Parties Description FonctionnelleAvant L’UTILISATION Montage du foret de perçage Fig PrecautionSélection de la mèche pour visseuse UtilisationVérifiez la direction de rotation de La mèche Fig Fonctionnement de l’interrupteurRotation seulement Rotation + frappeEnfoncement de vis à bois Fig Lors du vissage des vis machine FigUtilisation de la quenouille Fig Percussion uniquementMontage Comment Utiliser LA Couronne Pour UNE Charge LegereDémontage Fig Perçage FigEntretien ET Inspection Page Page Page Page Page Page Significado DE LAS Palabras DE Señalización Información ImportanteNormas Generales DE Seguridad SeguridadGuarde Estas Instrucciones Eléctrica puede resultar en una lesión seria Utilice la herramienta correcta Maneje con cuidado las herramientas eléctricas Normas Y Símbolos Específicos DE SeguridadAislamiento Doble Para Ofrecer UNA Operación MÁS Segura ¡GUARDE Este Manual DE Instrucciones DondeNomenclatura Descripción FuncionalEspecificaciones Aplicaciones Montaje Y OperaciónAntes DE LA Operación Precaución Montaje de la broca FigSelección de la broca destornillador Como SE USAConfirmar la dirección de rotación De la broca Fig Operación del conmutadorRotación solamente Rotación + golpeteoAtornillando tornillos para madera Fig Cuando coloque tornillos para metal FigModo de usar el tope Fig Percusión solamenteMontaje Modo DE Usar LA Barrena Tubularpara Cargas LigerasDesmontaje Fig Modo de taladrar FigMantenimiento E Inspección Accesorios Estándar AccesoriosAncla de martillar Percusión solamente Tipo de reborde exterior con tornillo hembra Excavar, ranuado y rebordes Percusión solamente Perforación rotación solamente Hitachi Page Page Page Hitachi Koki Canada Co