Hitachi DH 24PC instruction manual When driving wood screws Fig, Striking only

Page 14

English

CAUTION:

◯Exercise care not to excessively prolong driving time, otherwise, the screws may be damaged by excessive force.

◯Apply the rotary hammer perpendicularly to the screw head when driving a screw; otherwise, the screw head or bit will be damaged, or driving force will not be fully transferred to the screw.

◯Do not attempt to use the rotary hammer in the rotation and striking function with chuck adaptor (D) and bit attached.

5.When driving wood screws (Fig. 10)

(1)Selecting a suitable driver bit

Employ phillips screws, if possible, since the driver bit easily slips off the heads of slotted-head screws.

(2)Driving in wood screws

◯Prior to driving in wood screws, make pilot holes suitable for them in the wooden board. Apply the bit to the screw head grooves and gently drive the screws into the holes.

◯After rotating the rotary hammer at low speed for a while until a wood screw in partly driven into the wood, squeeze the trigger more strongly to obtain the optimum driving force.

CAUTION:

◯Exercise care in preparing a pilot hole suitable for the wood screw taking the hardness of the wood into consideration. Should the hole be excessively small or shallow, requiring much power to drive the screw into it, the thread of the

wood screw may sometimes be damaged.

Change Lever

6.Striking only

This rotary hammer can be set to strik- ing only mode by pressing the push button and turning the change lever to

mark. (Fig. 11)

(1)Mount the bull point or cold chisel.

(2)Press the push button and set the

change lever to middle of mark and

mark. (Fig. 12)

Then rotation is released, turn the grip and adjust the cold chisel to desired po- sition. (Fig. 13)

(3)Turn the change lever to mark. (Fig. 11)

Then bull point or cold chisel is locked.

Push button

Fig. 11

Change Lever

Push button

Fig. 12

14

Image 14

Contents DH 24PC Manual DE Instrucciones E Instrucciones DE SeguridadContents Meanings of Signal Words Important InformationSafety General Safety RulesEnglish Keep all screws, bolts and covers tightly in place Specific Safety Rules and Symbols Do not wipe plastic parts with solventDouble Insulation for Safer Operation Name of Parts SpecificationsFunctional Description Prior to Operation Assembly and OperationApplications Mounting the drill bit Fig Installation of dust cup or dust colLector B Optional accessories Selecting the driver bit HOW to USESwitch operation Confirm the direction of bit rotation FigWhen driving machine screws Fig Rotation onlyWhen driving wood screws Fig Striking onlyUsing depth gauge Fig Mounting HOW to USE the Core BIT for Light LoadHow to bore Fig Dismounting. Fig Maintenance and Inspection Page Page Page Page Page Page Informations Importantes Signification DES Mots D’AVERTISSEMENTConserver CES Instructions SecuriteRegles Generale DE Securite Français Utiliser l’outil correct Regles DE Securite Specifiques ET Symboles Ne pas essuyer les parties en plastique avec du solvantDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Precaution Montage du foret de perçage FigVérifiez la direction de rotation de La mèche Fig UtilisationSélection de la mèche pour visseuse Fonctionnement de l’interrupteurRotation + frappe Rotation seulementLors du vissage des vis machine Fig Enfoncement de vis à bois FigPercussion uniquement Utilisation de la quenouille FigComment Utiliser LA Couronne Pour UNE Charge Legere MontagePerçage Fig Démontage FigEntretien ET Inspection Page Page Page Page Page Page Información Importante Significado DE LAS Palabras DE SeñalizaciónGuarde Estas Instrucciones SeguridadNormas Generales DE Seguridad Eléctrica puede resultar en una lesión seria Utilice la herramienta correcta Normas Y Símbolos Específicos DE Seguridad Maneje con cuidado las herramientas eléctricas¡GUARDE Este Manual DE Instrucciones Donde Aislamiento Doble Para Ofrecer UNA Operación MÁS SeguraEspecificaciones Descripción FuncionalNomenclatura Antes DE LA Operación Montaje Y OperaciónAplicaciones Montaje de la broca Fig PrecauciónConfirmar la dirección de rotación De la broca Fig Como SE USASelección de la broca destornillador Operación del conmutadorRotación + golpeteo Rotación solamenteCuando coloque tornillos para metal Fig Atornillando tornillos para madera FigPercusión solamente Modo de usar el tope FigModo DE Usar LA Barrena Tubularpara Cargas Ligeras MontajeModo de taladrar Fig Desmontaje FigMantenimiento E Inspección Accesorios Accesorios EstándarAncla de martillar Percusión solamente Tipo de reborde exterior con tornillo hembra Excavar, ranuado y rebordes Percusión solamente Perforación rotación solamente Hitachi Page Page Page Hitachi Koki Canada Co