Bad Boy Mowers 02.9812.0001C Movement of the luminaire around the axis of the tilt tube

Page 102

BAD BOY™ SPOT LUMINAIRE USER MANUAL

Terminate/ Termination

Termination refers to the dampening of DMX signal at the end of the transmission line. Termination is created by placing a 100 ohm resistor between pins 2 and 3 of the DMX line. Often, there is a switch on DMX devices to do this internally. If not, a terminator is provided in the form of an XLR connector with the proper resistor between pins 2 and 3 to be placed in the DMX Thru port on the device.

Tilt

The movement of the luminaire around the axis of the tilt tube.

Time

Control of the duration of the change of the variable parameters of some automated luminaires and other

 

devices in a lighting system.

Timing

A Timing Channel is used in lieu of cue fade rate to determine the time it will take a luminaire to move from

Channel

one setting to another. For example, a cue in which a luminaire pans from one side of stage to the other may

 

look "steppy" if cue fade rate is used, because of the nature of the DMX512 signal. To overcome this, a

 

timing channel allows the luminaire to calculate the move "in time," effectively smoothing out the

 

movement.

Zero

Pan and Tilt values at 50%. Also called "Home Position" or a "50/50" cue or group.

Position

 

Zoom Table

Allows the fixture to maintain sharp focus on an image throughout the zoom range. (Note that zoom tables

 

are sensitive to throw distance. For this reason, a variety of zoom table versions are available for use with

 

different throws.)

8-Bit DMX

The universally accepted lighting control protocol in the entertainment industry. A console uses this protocol

 

to control specific devices in a lighting system. A DMX512 channel packet is eight bits of absolute parameter

 

data. 8-bit refers to the resolution of the signal: 256 step resolution, providing channel values from 0 through

 

255. A DMX512 data packet is a group of 512 data channels.

16-Bit DMX

To smooth out the movement of automated luminaires, the industry has adopted 16-bit DMX. This is not a

 

change to the DMX512 specification, rather a change in the way luminaires and consoles treat DMX512

 

information. In practice, 16-bit DMX adds a DMX512 channel each to pan and tilt - pan coarse, pan fine, tilt

 

coarse, tilt fine, instead of just pan and tilt. The console and luminaire combine these levels and increase the

 

resolution of pan and tilt from 256 steps to a theoretical maximum 65,536 steps at the console level, resulting

 

in the ability to position the luminaire more accurately.

92

02.9812.0001C

Page 101 Page 102
Image 102
Page 101 Page 102
Contents Spot Luminaire Production Resource Group, LLC. All Rights Reserved Safety Notice Compliance Notice02.9812.0001C Iii Revision History This manual has been revised as followsTable of Contents Troubleshooting and Maintenance OperationAppendix A. Technical Specifications Routine MaintenanceAppendix B. Glossary Viii Introduction About This ManualAdditional Documentation Customer Service PRG Dallas International Service PRG AtlantaGobo Art Submission Guidelines 02.9812.0001C Description Features FeaturesOverview Replacement Items and Accessories ComponentsIncluded Items Major Components and Controls Bad Boy Luminaire External Components and ControlsInstallation Data Power and Data Cabling RequirementsPower DMX512 CablesXLR 5-pin connectors should be wired as follows Recommended Cable TypesDMX512 Male Termination Connector Ethernet CablesInstallation Procedures Unpacking and Attaching Hanging BracketsTo unpack and attach brackets To install in standard 2-point hang Standard HangStandard Hanging Configuration and Dimensions To install in vertical hang Vertical Yoke Out HangVertical Yoke Out Hanging Configuration To install in a standing position Standing PositionConnecting Power and Data Data ConnectionsTo connect power and data 10 Connecting Power and Data CablesPower Up and Basic Setup Procedures Powering Up the LuminaireTo power up Bypassing Calibration Comm LED OperationTo bypass calibration Setting a Starting Address DMX CommTo program a starting address Ethernet Art-Net Comm 15 Selecting a Universe Ethernet ControlStarting the Lamp To start lamp using Menu TouchscreenLamp Operation Settings Lamp Warm-UpConfiguring Comm Loss Setting Configuring Universe, Comm, and Other OptionsTo configure the Comm Loss setting Accessory Options To install follow spot handlesFollow Spot Operation Enabling Pan/Tilt Free Mode Using Control ChannelsAt Pan/Tilt Menu Operation Menu System Using the Menu TouchscreenScreen Saver Mode NavigationOn-Board Battery Battery Wake SwitchMenu System Overview Menu System OverviewMenu Details Home ScreenConfiguration Screen Lamp ScreenPan/Tilt Screen Information ScreenCommunication Screen Status ScreenTest Screen DMX512 Operation Channel MappingDMX512 Channel Mapping Gobo Wheel Wheel ControlWheel Control Color WheelsControl Channel Control Channels Control ChannelsTiming Channel Mapping Timing ChannelsChannel Functions Channel Function / Timing Channel RelationshipTiming Channels Timing Channels Timing Channels Zoom Tables Gobo Set Zero PositionTo set zero position Troubleshooting Maintenance Troubleshooting Troubleshooting GuideErrors Mechanism Errors Other Errors Testing Test ScreenMechanical Test Group Test To perform a group testSoftware Update Software Update Using LumLoader ApplicationDownload the Software Software Crossload Equipment Handling Proper Lamp Servicing and OperationParts Routine MaintenanceRemoving the Head Covers Tools and Supplies02.9812.0001C Removing the Aft Cover To remove Aft CoverRemoving the Enclosure Covers To remove Upper Enclosure CoversCleaning the Head Electrostatic Filters To clean head filtersCleaning the Enclosure Intake Filters To clean enclosure intake filtersTools and Supplies Parts Cleaning the Luminaire Exterior To clean luminaireCleaning the Lenses To clean lensesRemoving Front Glass Accessing Zoom Lens Assembly Cleaning Gobo, Color and Dimmer Wheels To clean gobo, color and dimmer wheelsReplacing the Lamp To replace lampReplacing the Lamp Adjusting the Lamp To adjust lampReplacing a Gobo To replace a gobo11 Replacing a Gobo 12 Gobo Positions and Alignment Replacing a Designer Color Filter To replace a designer color filterOpen 02.9812.0001C Technical Specifications Bad Boy Spot Luminaire ControlTechnical Specifications Bad Boy Road Case AC Line Current / Power vs. Voltage Photometric DataNarrow Zoom Iris Full Open 8º Full Angle 40,000 beam LumensMedium Zoom Iris Full Open 34º Full Angle 48,000 beam LumensWide Zoom Iris Full Open 56º Full Angle 50,000 beam Lumens8º, 34º and 56º Zoom settings Logarithmic Beam Illuminance Comparison02.9812.0001C Glossary Glossary of Terms Signal Movement of the luminaire around the axis of the tilt tube

02.9812.0001C specifications

Bad Boy Mowers has established itself as a premier manufacturer of innovative lawn care solutions, and the Bad Boy Mowers 02.9812.0001C model epitomizes their commitment to quality, performance, and user satisfaction. This commercial-grade mower is designed for those who take landscaping seriously, combining robust construction with advanced technologies.

One of the standout features of the 02.9812.0001C is its powerful engine, which typically boasts impressive horsepower, allowing it to tackle tough mowing tasks with ease. This model is engineered for longevity and reliability, ensuring that it can handle the demanding needs of professional landscapers as well as homeowners who want the very best for their lawns.

The 02.9812.0001C is designed with a wide cutting deck, often measuring 60 inches, allowing for efficient lawn coverage. This larger cutting width enables users to complete mowing tasks quicker, reducing the amount of time spent on the job. Additionally, the reinforced steel construction of the cutting deck provides durability and resilience, ensuring it can withstand the rigors of frequent use.

One of the key technologies incorporated into this model is its dual hydrostatic transmission system, which offers superior maneuverability and control. This feature allows users to easily navigate around obstacles and tight corners, providing a more precise mowing experience. The intuitive controls enhance the user experience, making it simple for operators of all skill levels to achieve desired results.

Another remarkable aspect of the Bad Boy Mowers 02.9812.0001C is its suspension system, which contributes to a smoother ride, reducing operator fatigue during extended use. This is especially beneficial when mowing uneven terrain, as the suspension effectively absorbs shocks and vibrations.

For enhanced comfort, the mower includes an ergonomic seat designed for maximum support, along with easy-to-reach controls for seamless operation. The model also features a commercial-quality air filtration system, ensuring optimal engine performance while extending maintenance intervals.

In summary, the Bad Boy Mowers 02.9812.0001C is an exceptional choice for those seeking a powerful, efficient, and user-friendly mower. With its advanced features, durable construction, and smart technologies, this model meets the demands of both professional landscapers and dedicated homeowners, making it a worthy investment for anyone serious about lawn care.
Top Page Image Contents