15.Use safety equipment. Always wear eye protection.
LIGHT USE AND CARE
16.Do not force the Halogen Light. Use the correct light for your application. The correct light will do the job better and safer at the rate for which it is designed.
17.Do not use the light if the On/Off Switch does not turn it on or off.
18.Disconnect the Power Cord Plug from the power source before making any adjust- ments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
19.Store the Light out of reach of children and other untrained persons. The Halogen Light is dangerous in the hands of untrained users.
20.Maintain the Light with care. Do not use a damaged light. Tag damaged light “Do not use” until repaired.
21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the light’s operation. If damaged, have the light serviced before using. Many accidents are caused by poorly maintained lights.
22.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another light.
SERVICE
23.Light service must be performed only by qualified repair personnel. Service or mainte- nance performed by unqualified personnel could result in a risk of injury.
24.When servicing a light, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthor- ized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the Light. Never remove the grounding prong from the plug. Do not use the Light if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
SKU 30858 | For technical questions please call | Page |