5.Making certain NOT TO TOUCH the new Halogen Bulb (3), insert it into the Light left side first.
Do not touch the Halogen Bulb at any time. Oil from skin will drastically shorten the bulb’s
6.Insert the Bolt (2) and replace the Grid.
Operation
1.To turn on the Light, plug the Power Cord into a 120 volt, grounded, electrical outlet.
WARNING! Always point the light away from the wall, whether the unit is in use or not. If the unit is accidentally pointed at the wall while turned on or still hot
after turned off, a fire may result.
2.Unplug the light to turn it off.
Inspection, Maintenance and Cleaning
1.Always unplug the Halogen Light from its electrical outlet and allow the unit to completely cool down before performing any inspection, maintenance, or cleaning.
2.Before each use: Inspect the general condition of the Halogen Light. Check for misalignment or binding of moving parts, cracked or broken parts, damaged Power Cord, damaged Grid, Lens and any other condition that may affect its safe operation. If a problem occurs with the Light, have the problem corrected before further use. Do not use damaged equipment.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS DIAGRAM INTHIS MANUAL AS A REFERENCETOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTSTHERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 30858 | For technical questions please call | Page |
|
| REV 12/06 |