Sanyo VCC-4324 instruction manual Connections, Coaxial cable type and maximum length

Page 12

CONNECTIONS

(A)

1

2

(Video signal connections)

: VIDEO IN : VIDEO OUT

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Insert the plug of this power cord into a wall outlet.

The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

Cable type RG-59U (3C-2V), 250 m maximum.

Cable type RG-6U (5C-2V), 500 m maximum.

Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

The RG-59U type cable should not be run through electrical conduits or through the air.

Using CCTV/Video-grade coaxial cable.

10 English

Image 12
Contents VCC-4324 About this manualExclusions Contents FeaturesInformation to User For the customers in CanadaPour la clientèle canadienne Precautions Camera installation bracket Parts NamesParts Names Power indicator Power Video output connector Video OUT BNC typeLine phase adjustment volume Line Phase Rolling can be minimized by turning this volumeFlange-back adjustment Installation of a DC type auto-iris lens sold separately Installation of a Video type auto-iris lens sold separatelyMounting the Lens Check the lens mountIf using a Video type auto-iris lens Mounting the LensPin layout DC type lenses Video type lenses Connections Coaxial cable type and maximum lengthSettings Line phase adjustmentWhite balance adjustment Settings Lens iris adjustmentBacklight compensation setting Electronic iris function setting When using an auto-iris lens for indoor/outdoor useTroubleshooting W color/black and white switch settingNo picture on the monitor screen Picture is not clearSpecifications Specifications Dimensions mm