Sanyo VCC-4324 instruction manual Parts Names

Page 7

PARTS NAMES

6

a b de f g

6Camera setup section (under the cover)

This unit factory settings are as indicated below. These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However, if due to installation conditions or environment the settings may need to be modified for best results (see "SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover.

Control name

Position

a Color and Black/White level switch (C-BW)

L

 

 

b Internal/Line lock switch (SYNC)

INT

 

 

c Red and Blue color adjustment volume (R, B)

about center

 

 

d White balance switch (WB)

A

C-BW L-L

H

L

INT

SYNC

 

WB EI

 

A

 

ON

 

OFF

 

ON

 

M

 

BLC

R

B

VR303

VR302

VR301

LEVEL

L H

DC VIDEO

A.I.

LENS

e Electronic iris (EI)/Backlight compensation (BLC) switch

OFF

f Auto-iris lens switch (A.I. LENS)

DC

 

 

g Lens iris level volume (LEVEL)

about center

Notes:

c

The EI/BLC switch cannot be used simultaneously.

When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the A.I. LENS switch to the VIDEO position.

If not using an auto-iris lens, make sure the BLC switch is set to OFF.

English 5

Image 7
Contents About this manual VCC-4324Exclusions Features ContentsFor the customers in Canada Information to UserPour la clientèle canadienne Precautions Parts Names Camera installation bracketParts Names Rolling can be minimized by turning this volume Power indicator PowerVideo output connector Video OUT BNC type Line phase adjustment volume Line PhaseFlange-back adjustment Check the lens mount Installation of a DC type auto-iris lens sold separatelyInstallation of a Video type auto-iris lens sold separately Mounting the LensMounting the Lens If using a Video type auto-iris lensPin layout DC type lenses Video type lenses Coaxial cable type and maximum length ConnectionsLine phase adjustment SettingsWhite balance adjustment Lens iris adjustment SettingsBacklight compensation setting When using an auto-iris lens for indoor/outdoor use Electronic iris function settingPicture is not clear TroubleshootingW color/black and white switch setting No picture on the monitor screenSpecifications Dimensions mm Specifications