PARTS NAMES
| 7 Power indicator (POWER) |
7 | Comes on when the power to the camera is on. |
9 | |
| 8 Video output connector (VIDEO OUT: BNC type) |
8 | Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. |
F | 9 Line phase adjustment volume (LINE PHASE) | |
|
| |
| When using two cameras or more, the image on the monitor may roll vertically when switching sources. This | |
| rolling can be minimized by turning this volume. | |
| F 24 V AC input terminal (24 V AC, GND) | |
| With this camera use only the 24 V AC power adaptor model No. | |
|
| Power supply connections |
|
| |
AC
GRD
AC
Use a 3 wire grounded cable (22 AWG or more), and connect as shown by the illustration.
CAUTION:
•To prevent camera and/or AC adaptor failure, pay close attention to polarity when making the connections.
•To prevent fire hazard any UL listed wire rated
6 English