Kawasaki 840273 Symbols, Symbol Name Explanation, Volts Voltage Potential Amperes Current Hertz

Page 5

Always wear an OSHA approved dusk mask or respirator when inside the work area. Replace the filter daily. NOTE: Not all dust masks offer protection from lead paint dust. Be sure to use the proper mask for the job.

Before connecting the tool to the power supply follow the safety instructions for installing the grinding or cutting wheels. Do not lock the wheels too tight or cracks may occur.

Only use grinding or cutting wheels with the correct bore size for the spindle of the grinder.

Use standard parts. Do not use coolant or water and do not use as a fixed grinder.

Do not start the tool when the grinding or cutting wheels are touching the work area.

Keep the power cord well away from the cutting area during use. Always position the cord so that it will not be caught in the workpiece when the grinder is in use.

Always have the guards in place and properly positioned when using grind- ing wheels or wire cup brushes.

Secure the material being grinded. Never hold it in your hand or across your legs. Do not use your legs or feet to stabilize the workpiece. Unstable support can cause loss of control and could result in lacerations or injury.

Always make sure no one, including the user, is in line with the tool when starting the motor.

Always use both hands when operating the Angle Grinder.

Always hold this tool by the insulated gripping surfaces. If this tool should accidentally cut across its own cord or hidden wiring, all exposed metal parts will become live and could seriously shock the user.

When using the Angle Grinder, always maintain a firm grip on the tool. Keep your hands well away from the grinding wheel or brush. Never reach under- neath the Angle Grinder while the sanding disk is in motion.

When the Angle Grinder is in operation, keep hands away from the cutting or grinding area.

Do not run the Angle Grinder while carrying it at your side. A moving grind- ing wheel or brush could cause lacerations or personal injury.

The disc will not stop immediately when the Angle Grinder is turned off. Exercise caution.

Do not set the Angle Grinder down after use until the grinding or cutting wheels have come to a complete stop.

Keep the handle of the Angle Grinder dry, clean and free from oil and grease.

7

Unplug Angle Grinder from power supply and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories or performing any inspection, maintenance or cleaning proce- dures. Such preventive safety measures reduce the risk of starting the tool acci- dentally which could cause serious personal injury.

Only use grinding and cutting wheels that are approved for a maximum speed of 13,000 rpm or greater.

After replacing a wheel or brush, always let the tool run for one minute in a well-protected area. If the new accessory has an undetected flaw, it should break apart in less than a minute.

Do not use the Angle Grinder if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Angle Grinder. These carry important information. If unreadable or missing, contact Alltrade for a replacement.

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL

NAME

EXPLANATION

 

 

V

Volts

Voltage (Potential)

 

 

A

Amperes

Current

 

Hz

Hertz

Frequency (Cycles per Second)

 

W

Watt

Power

 

Kg

Kilograms

Weight

 

 

 

 

 

 

 

Alternating Current

Type of Current

 

 

 

 

 

 

 

Direct Current

Type of Current

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alternating or Direct Current

Type of Current

 

 

 

 

 

 

 

Earthing Terminal

Grounding Terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Class II Construction

Denotes Double Insulation

 

min

Minutes

Time

 

 

s

Seconds

Time

 

￿

Diameter

Size of Drill Bits,

 

 

 

 

 

 

 

 

Grinding Wheels, etc.

 

 

 

 

 

 

 

No load speed

No-load Rotational Speed

.../min

Revolutions per Minute

Revolutions, Surface Speed,

 

 

 

 

 

 

 

 

Strokes, etc. per Minute

1,2,3, …

Ring Selector Settings

Speed, Torque or Position Settings

Page 4 Page 6
Image 5
Page 4 Page 6
Contents AMP Angle Grinder Recognize Safety SYMBOLS, Words and Labels Table of ContentsCongratulations Intended USEElectrical Safety Important SafeguardsSave These Instructions for Future Reference Work AreaService Personal SafetySpecific Safety Rules AND/OR Symbols Safety Rules for Angle GrindersSymbol Name Explanation SymbolsRing Selector Settings Volts Voltage Potential Amperes Current HertzFunctional Description AssemblyComponent Model Number Attaching Auxiliary HandleRemoving Guard for Sanding or Using Flat Wire Brushes Attaching Wire BrushesAttaching Wheels with Depressed Centers Edge GrindingMaintenance and Cleaning Operating the ON/OFF SwitchUsing the Angle Grinder Specifications AccessoriesAmpere Other Consumer DO-IT-YOURSELF DIY ToolsWarranty Performance Year Limited WarrantyCommercial or Rental Purpose ExclusionsLimitation Of Liability Warranty DisclaimersLimitations on Warranty Disclaimers

840273 specifications

The Kawasaki 840273 is a powerful industrial engine designed to deliver exceptional performance and reliability across various applications. Renowned for its durability, this engine is particularly suitable for heavy-duty equipment, including construction machinery, agricultural vehicles, and power generators.

One of the standout features of the Kawasaki 840273 is its robust construction. Engineered with high-quality materials, it boasts a cast iron block and cylinder head that ensure long-lasting performance even in the most demanding environments. This durability not only extends the lifespan of the engine but also reduces the frequency of maintenance required, translating to lower operational costs for businesses.

In terms of technology, the Kawasaki 840273 employs advanced fuel injection systems that optimize fuel efficiency and power output. This precise fuel delivery enhances combustion efficiency, resulting in improved torque characteristics and reduced emissions. The engine’s turbocharging capability further amplifies its performance, allowing it to maintain high power levels even at lower RPMs, making it an ideal choice for applications requiring immediate responsiveness.

Another significant characteristic of the Kawasaki 840273 is its ease of integration into existing systems. The engine is designed with versatility in mind, featuring standard mounting points and electrical connections that streamline installation. This adaptability ensures that operators can quickly incorporate the engine into various setups without extensive modifications.

The Kawasaki 840273 also prioritizes operator comfort and safety, equipped with comprehensive monitoring systems that provide real-time data on engine parameters. This enhances overall efficiency and empowers users to make informed decisions, ultimately improving productivity. Additionally, the engine’s design minimizes vibration and noise levels, creating a more pleasant working environment.

Moreover, the Kawasaki 840273 complies with stringent environmental regulations, making it a responsible choice for businesses aiming to reduce their carbon footprint. Its design minimizes harmful emissions and optimizes fuel consumption, aligning perfectly with the modern industry's push towards sustainability.

In conclusion, the Kawasaki 840273 stands out as a leading choice for industries requiring a dependable and efficient industrial engine. With its combination of advanced technology, robust build quality, user-friendly features, and environmental compliance, it continues to set the standard for performance and reliability in various applications.
Top Page Image Contents