Operating the ON/OFF Switch

Never switch the Angle Grinder “ON” or “OFF” while under load conditions.

Always allow the Angle Grinder to come up to full speed before touching any surface.

Always take the tool away from the workpiece before turning the tool “OFF”. Let the tool come to a complete stop before setting it down.

This tool operates best under light pressure. Exerting heavy pressure will not speed up the work and may cause damage to the motor.

LOCK-ON

BUTTON

ON/OFF

SWITCH

•When starting hold the Angle Grinder firmly with both hands. One hand on the rear handle or the motor housing and the other hand on the side handle.

•The switch can be locked in the “ON” position, a convenience for long grinding operations.

•To turn the Angle Grinder “ON” without locking it, apply pressure to the switch button. When pressure is released, the switch button snaps to the “OFF” position.

•To lock th switch “ON”, press the switch button forward and press the lock button.

•To unlock the switch, simply press and release the lock button. Switch is spring loaded and will snap back automatically.

USING THE ANGLE GRINDER:

For best tool control, material removal and minimal loading, keep the angle between the disc and the work surface at approxi- mately 30° when grinding and 10°-15° when sanding.

•Do not cover exhaust vents when the Angle Grinder is in use. This may cause damage to the motor and reduce efficiency.

•Guide back and forth over the work piece in a steady motion.

•When cutting avoid tilting the Angle Grinder in the cutting plane. Ensure the cut- ting wheel has a clean cutting edge.

•To cut hard stone a diamond cutting wheel is recommended.

•Do nut use cutting wheel for rough grinding.

MAINTENANCE AND CLEANING

Always UNPLUG the tool from the power source before cleaning or maintenance.

•The armature and motor are the heart of the power tool. Exercise care to ensure they do not become damaged or effected by oil or water.

•Inspect the carbon brushes regularly and replace them when they are worn. (about 1/3 of the way up)

•Regularly inspect all mountings and screws and ensure they are properly tight- ened. Failure to do so may result in serious damage.

•Consult an authorized maintenance service agent in event of damage.

•Clean and dust the Angle Grinder after each use.

•Use compressed air to blow out any accumulated dust or grit. Tiny particles from metal grinding often accumulate inside your tool and could create an electrical shock hazard.

•Never use solvents or harsh chemicals. Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.

•Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

840273 specifications

The Kawasaki 840273 is a powerful industrial engine designed to deliver exceptional performance and reliability across various applications. Renowned for its durability, this engine is particularly suitable for heavy-duty equipment, including construction machinery, agricultural vehicles, and power generators.

One of the standout features of the Kawasaki 840273 is its robust construction. Engineered with high-quality materials, it boasts a cast iron block and cylinder head that ensure long-lasting performance even in the most demanding environments. This durability not only extends the lifespan of the engine but also reduces the frequency of maintenance required, translating to lower operational costs for businesses.

In terms of technology, the Kawasaki 840273 employs advanced fuel injection systems that optimize fuel efficiency and power output. This precise fuel delivery enhances combustion efficiency, resulting in improved torque characteristics and reduced emissions. The engine’s turbocharging capability further amplifies its performance, allowing it to maintain high power levels even at lower RPMs, making it an ideal choice for applications requiring immediate responsiveness.

Another significant characteristic of the Kawasaki 840273 is its ease of integration into existing systems. The engine is designed with versatility in mind, featuring standard mounting points and electrical connections that streamline installation. This adaptability ensures that operators can quickly incorporate the engine into various setups without extensive modifications.

The Kawasaki 840273 also prioritizes operator comfort and safety, equipped with comprehensive monitoring systems that provide real-time data on engine parameters. This enhances overall efficiency and empowers users to make informed decisions, ultimately improving productivity. Additionally, the engine’s design minimizes vibration and noise levels, creating a more pleasant working environment.

Moreover, the Kawasaki 840273 complies with stringent environmental regulations, making it a responsible choice for businesses aiming to reduce their carbon footprint. Its design minimizes harmful emissions and optimizes fuel consumption, aligning perfectly with the modern industry's push towards sustainability.

In conclusion, the Kawasaki 840273 stands out as a leading choice for industries requiring a dependable and efficient industrial engine. With its combination of advanced technology, robust build quality, user-friendly features, and environmental compliance, it continues to set the standard for performance and reliability in various applications.