SECTION 6: MAINTENANCE
Maintenance Safety
Your safety is important! Please follow the warnings below during this entire section:
Serious personal injury could occur if you con- nect your machine to the power source dur- ing the maintenance pro- cess. DO NOT connect the machine to the power source while performing any maintenance on this machine.
Loose hair and cloth- ing could get caught in machinery and cause serious personal inju- ry. Keep loose clothing rolled up and long hair tied up and away from machinery.
Projectiles from the machine could cause serious eye injury. Wear safety glasses at all times.
H7761 2" x 27" Belt & 6" Disc Combo Sander
Schedule
Before Each Use:
•Tighten back stop, table or guard knobs.
•Replace any worn or damaged sanding discs or belts.
•Check for worn or damaged wires.
•Check for any other condition that could hamper the safe operation of this machine.
After Each Use:
•Turn OFF machine.
•Wipe off the sawdust
Weekly Maintenance:
•Wipe a lubricant such as SLIPIT® onto the table.
•Keep unpainted surfaces rust free with prod- ucts such as Boeshield®