SECTION 3: SET UP
Set Up Safety |
| Inventory |
|
|
|
|
|
|
This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!
Wear safety glasses dur- ing the entire set up pro- cess!
Unpacking
The Model H7761 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory the contents.
H7761 2" x 27" Belt & 6" Disc Combo Sander
After all the parts have been removed from the | ||
box, you should have the following items: |
| |
Inventory (Figure 2) | Qty | |
A. | Sander Unit | 1 |
B. | Disc Sanding Table | 1 |
C. | Miter Gauge | 1 |
D. | Back Stop | 1 |
E. | Sanding Table Angle Knobs | ... 2 |
F. | Flat Washers 6mm | 2 |
G. | Back Stop Adjustment Knob | 1 |
H. | Flat Washer 5mm | 1 |
I. | Hex Nut | 1 |
A
B
E | C | |
H | ||
|
G 
I 
D
F
Figure 2. Inventory.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.