General Operating Instructions
To prevent injury from Burns:
With normal use, the motor housing (7) will get hot. This is normal and not harmful to the tool. However, the hot surface of the housing may be harmful if touched or present a danger if it is within three (3) feet of flammable material. If the tool is used for a prolonged period of time and if the housing becomes EXTREMELY HOT, stop using the tool until the unit cools off. Also the Chuck housing will become warm. If it becomes uncomfortable to hold, rest the tool and allow it to cool down.
1.Before using this tool, make sure that clothing, hair and work pieces are out of the way of the Hand Piece and the Bit. Turn the tool ON.
2.Adjust tool speed by pressing on the Foot Control (27).
3.If the Flexible Shaft (21) does not operate properly, inspect the connections to the Flexible Shaft.
4.To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach.
REV 04c, 04l, 08l, 09c, 09e |
| |
SKU 40432 | For technical questions, please call | Page 9 |