Cisco Systems ASR 903 4-4

4-4

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-05

Chapter4 Cisco ASR 903 Router Initial Configuration

Powering Up the CiscoASR 903 Router

*Feb 19 17:34:29.720: %PARSER-4-BADCFG: Unexpected end of configuration file.

*Feb 19 17:34:29.809: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not

available. The network clock has changed to freerun

*Feb 19 17:34:10.138: %CPPHA-7-SYSREADY: F0: cpp_ha: CPP client process FMAN-FP (5 of

5) ready.

*Feb 19 17:34:29.824: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up

*Feb 19 17:34:10.269: %IOSXE-6-PLATFORM: F0: cpp_cp: cpp_mlp_svr_client_bind:

cpp_mlp_svr_ifm_init() successful

*Feb 19 17:34:10.362: %CPPHA-7-START: F0: cpp_ha: CPP 0 preparing image

/usr/cpp/bin/cpp-mcplo-ucode

*Feb 19 17:34:10.473: %CPPHA-7-START: F0: cpp_ha: CPP 0 startup init image

/usr/cpp/bin/cpp-mcplo-ucode

*Feb 19 17:34:14.688: %CPPHA-7-START: F0: cpp_ha: CPP 0 running init image

/usr/cpp/bin/cpp-mcplo-ucode

*Feb 19 17:34:14.919: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initialization

complete

*Feb 19 17:34:14.919: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system configuration

start.

*Feb 19 17:34:15.179: %IOSXE-6-PLATFORM: F0: cpp_cp: Process

CPP_PFILTER_EA_EVENT__API_CALL__REGISTER

*Feb 19 17:34:15.286: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system enabled.

*Feb 19 17:34:15.287: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system initializaton

complete.

*Feb 19 17:34:30.823: %LINEPROTO-5-UPDOWN: Line protocol on Interface

GigabitEthernet0, changed state to down

*Feb 19 17:35:12.865: %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state

to administratively down

*Feb 19 17:35:12.865: %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state

to administratively down

*Feb 19 17:35:12.865: %LINK-5-CHANGED: Interface GigabitEthernet0/0/2, changed state

to administratively down

*Feb 19 17:35:12.865: %LINK-5-CHANGED: Interface GigabitEthernet0/0/3, changed state

to administratively down

*Feb 19 17:35:13.865: %LINEPROTO-5-UPDOWN: Line protocol on Interface

GigabitEthernet0/0/0, changed state to down

*Feb 19 17:35:13.865: %LINEPROTO-5-UPDOWN: Line protocol on Interface

GigabitEthernet0/0/1, changed state to down

*Feb 19 17:35:13.866: %LINEPROTO-5-UPDOWN: Line protocol on Interface

GigabitEthernet0/0/2, changed state to down

*Feb 19 17:35:13.866: %LINEPROTO-5-UPDOWN: Line protocol on Interface

GigabitEthernet0/0/3, changed state to down

*Feb 19 17:35:19.167: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces

disabled

*Feb 19 17:35:19.171: %ASR1000_OIR-6-INSCARD: Card (fp) inserted in slot F0

*Feb 19 17:35:19.171: %ASR1000_OIR-6-ONLINECARD: Card (fp) online in slot F0

*Feb 19 17:35:19.187: %ASR1000_OIR-6-INSCARD: Card (cc) inserted in slot 0

*Feb 19 17:35:19.187: %ASR1000_OIR-6-ONLINECARD: Card (cc) online in slot 0

*Feb 19 17:35:19.189: %ASR1000_OIR-6-INSSPA: SPA inserted in subslot 0/0

*Feb 19 17:35:19.452: %SYS-5-RESTART: System restarted --

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version

12.2(33)XNA, RELEASE SOFTWARE

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 20-Dec-07 18:10 by mcpre

*Feb 19 17:35:19.455: %SYS-6-BOOTTIME: Time taken to reboot after reload = 78809

seconds

*Feb 19 17:35:19.551: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF

*Feb 19 17:35:21.669: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded

from the Shell Manager

*Feb 19 17:35:22.221: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF

Router>