2-18
Cisco ASR 903 Router Hardware Installation Guide
OL-25178-05
Chapter2 Preparing for Installation
Site Planning
Installation Checklist
To assist you with your installation and to provide a record of what was done by whom and when,
photocopy the CiscoASR 903 Router Installation Checklist shown in Tab le 2-1 . Use this to record the
completion and verification of each procedure. After the checklist is completed, place it in your Site Log
along with the other records pertaining to your new Cisco router.
Table2-1 CiscoASR 903 Router Installation Checklist
Task
Verified
By Date
Date on which chassis received
Chassis and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site Log established and background information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device names, and so on, available
Required tools available
Network connection equipment available
Cable-management brackets installed (optional, but recommended)
AC power cables connected to AC sources and router
DC power cables connected to DC sources and router
Network interface cables and devices connected
System power turned on
System boot complete (STATUS LED is on)
Shared port adapters are operational
Correct software configuration displayed after system banner appears